BUY NOW, PAY LATER! YAMAHA MOTOR FINANCE OPTIONS AVAILABLE ON ALL BUY NOW, PAY LATER! FINANCE OPTIONS AVAILABLE ON ALL BUY NOW, PAY LATER! FINANCE AVAILABLE! FINANCE Options AVAILABLE! APPLY NOW

PER WEEK

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions,

FROM
$104.66

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$20,150

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

FROM
$110.57

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$21,350

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

FROM
$137.38

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$26,800

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

FROM
$137.38

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$29,750

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

FROM
$162.72

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$31,950

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

FROM
$188.06

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$37,100

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

FROM
$200.11

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$39,550

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

FROM
$231.60

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$45,950

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

FROM
$213.64

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$42,300

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

FROM
$244.89

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$48,650

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

PER WEEK

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions,

PER WEEK

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions,

FROM
$104.66

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$20,150

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

FROM
$110.57

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$21,350

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

FROM
$137.38

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$26,800

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

FROM
$137.38

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$29,750

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

FROM
$162.72

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$31,950

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

FROM
$188.06

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$37,100

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

FROM
$200.11

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$39,550

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

FROM
$231.60

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$45,950

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

FROM
$213.64

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$42,300

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

FROM
$244.89

PER WEEK

10.15% Interest Rate

10.72% Comparison Rate

FROM
$48,650

DRIVEAWAY

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions, click here

PER WEEK

Credit Criteria, fees, charges, terms and conditions apply. For full terms and conditions,

F350

ExploreClose

The new 350 joins the Yamaha Offshore Outboard family, to deliver big horsepower, state-of-the art features, industry-leading boat control integration, premium level performance and reliability – filling an important segment in Yamaha’s high-horsepower line-up.

Incorporating an upgraded 4.3L engine block and extra-strong gear case, this outboard delivers 350 horsepower in an industry-leading lightweight package, making it more suitable to a wider range of offshore boating applications, than ever before.

The new 350 comes with many of the innovative features developed in Yamaha’s XTO 425 and 450 horsepower models, including built-in digital electric steering for premium, feature-rich control,  TotalTilt™ integrated tilt limiter for easier operation, thrust enhancing reverse exhaust for improved responsiveness, plus full compatibility with Yamaha’s exclusive Helm Master EX boat control system, across single and multiple outboard applications.

Combining all these awesome features with the choice of traditional Signature Grey or Pearlescent White colour options, this outboard will prove to be extremely popular in the offshore fishing scene.

FEATURES

New Look Cowling with Colour Options

The cowling has been completely redesigned for a more powerful, elegant and streamlined look. Integrated Electro-Hydraulic Steering models also offer the choice of signature Yamaha grey or pearlescent white finish, with premium looking raised chrome Yamaha graphics. Integrated Electro-Hydraulic model shown.

Helm Master® EX Control System

Helm Master ® EX is an industry-first fully integrated digital boat control system that delivers next level control over your boat for increased boating and fishing enjoyment. Now available for single and multiple outboard engine applications.

TotalTilt™ with Tilt Limiter

Available on Digital Electronic Control (DEC) models, Yamaha’s exclusive TotalTilt™ feature provides faster and easier engine tilting, by completely tilting the outboard up from any position with a simple double-push of the “UP” trim/tilt button, or fully tilting the outboard down (until trim ram contact) with a double-push of the “DOWN” trim/tilt button. This system also includes a built-in tilt limiter which automatically stops the engine tilt at a predetermined set point, to prevent engine contact with other objects.

Enhanced Lower Unit

Even after a decade of proven on-water performance in the harshest working conditions and marine environments, the new 4.2 litre V6 Offshore lower unit has received additional engineering improvements. New components and design features enhance the lower units legendary reliability and durability, further increasing operator confidence.

Fully Integrated Power System

The all-new V6 Offshore is fully compatible with Yamaha’s cutting-edge Helm Master EX boat control system, for a truly effortless boating experience. The full system combines Yamaha’s ‘drive-by-wire’ Digital Electronic Control (DEC), integrated Digital Electric Steering (DES), premium CL5 multifunction display, feature-packed autopilot and full manoeuvrability joystick.

ELECTRONIC THROTTLE VALVE

The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.

PLASMA FUSION CYLINDERS

The plasma fusion process creates a cylinder wall surface that is 60% harder than steel, removing the need for conventional steel cylinder sleeves. This significantly reduces weight, improves fuel efficiency and increases the engine capacity, resulting in an improved power-to-weight performance.

Thrust Enhancing Reverse Exhaust

Redirects exhaust bubbles away from the prop when operating in reverse and under 2500rpm, resulting in cleaner water for greater prop grip and significantly improved thrust. This is handy for navigating around marinas and docks, reversing onto your catch and when combined with the Helm Master EX joystick boating control system.

Built-In Digital Electric Steering (DES)

Yamaha’s bolt-on Digital Electric Steering (DES) can be added to all Digital Electronic Control engines including F225, F250 and F300. Delivers a smoother, faster and more precise steering, with additional capabilities. Removes need for steering pumps, hoses, hydraulic lines and bleeding procedures, resulting in a cleaner and less cluttered bilge area.

Enhanced Heat Management System

A rotating cooling fan has been incorporated into the flywheel to combat the potential build-up of residual heat inside the cowling. This cooling system is very effective in drawing heat out of the flywheel area even at low engine speeds, for improved durability and reliability.

Increased Charging Power

The enhanced heat management system keeps everything nice and cool under the cowling. This not only improves engine durability and reliability but creates more available amps, when it is needed most, at idle – powering the increasing array of electrical devices used in todays modern boats.

4256CC V6 Engine

This proven big block V-type 6-cylinder has an expanded piston stroke and a displacement of 4.3L, delivering more torque throughout all RPM ranges. Featuring plasma-fused, sleeveless cylinders, double overhead camshafts (DOHC) and four valves per cylinder, this engine is lightweight, powerful and fuel efficient.

Technical Specification

Engine Make: F350

Horse Power: 350

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4 Stroke

PRICE: Apply For price

  • Engine Type24 Valve DOHC with VCT Direct Action 60° – V6
  • Bore x Stroke (mm)96 x 98
  • Fuel Tank Capacity (l)
  • Displacement (cc)4256
  • Recommended Maximum RPM5000-6000
  • Fuel ManagementEFI
  • IgnitionTCI
  • Lubrication SystemWet-sump
  • Alternator Output12V-74A with Rectifier Regulator
  • Gear Ratio1.75 : 1 (Counter Rotating Prop Available)
  • Starter SystemElectric
  • Operation MethodDigital Electronic Control (DEC) & Digital Electric Steering (DES)
  • Trim and Tilt MethodPower Trim & Tilt with TotalTilt™
  • Digital Gauges – Optional

CLOSE

Yamaha F115

ExploreClose

Yamaha has been leading the way in the 115 horsepower four-stroke category for over ten years, with exceptional models that have proven the true value and versatility that a four-stroke outboard can deliver Australian boaters. With its increased engine capacity and a weight reduction of 15kg, the latest generation Yamaha F115 offers the best power-to-weight performance in its class – while maintaining an extremely fuel efficient and smooth operation that Yamaha four-strokes are famous for. This engine utilises a 16 valve, dual overhead camshaft design, electronic fuel injection and big bore throttle body to deliver awesome acceleration and mid-range responsiveness.

The 115 horsepower is now available in both signature Yamaha grey and new pearlescent white colour options, in both long and extra long shaft length.

FEATURES

1832CC FOUR-CYLINDER ENGINE

The 16 valve, 1.8 Litre, dual overhead camshaft design delivers superior efficiency in the transfer of intake and exhaust gasses throughout the RPM range. This outboard incorporates larger intake and exhaust valves which enhance response, efficiency and mid-range torque.

Anti-Corrosion - 5 Stage Paint System

Yamaha engines are known for their durability and high re-sale value. Part of this lies in the anti-corrosion protection. A unique YDC-30 aluminium alloy protects the engine’s exterior parts, while a zinc coating, high-quality stainless steel components and 5-stage exterior paint coating, offers long-lasting protection – inside and out.

 

 

COUNTER ROTATING PROPELLER

This engine offers a counter rotating propeller option for improved steering control for twin engine setups, ensuring the vessel maintains a ‘neutral helm’ at any speed.

Larger 81mm Cylinder Bore

The previous-generation F90 used a 79mm cylinder bore, in the next-generation F90 the cylinder bore size has been increased from 79mm to 81mm which provides more efficient power delivery. A larger valve has been used for increased transfer efficiency for both intake and exhaust.

MULTI-POINT ELECTRONIC FUEL INJECTION

The Multi-Point Electronic Fuel Injection (EFI) system, injects the right amount of fuel into the combustion chamber at the optimum timing, for ‘first-time, every-time’ hot and cold starting, improved fuel efficiency, excellent throttle response.

OFFSET CRANKSHAFT

The crankshaft design is offset 5mm from the centre of cylinder for more efficient transfer of power to the crankshaft.

SHIFT DAMPENER SYSTEM

Yamaha’s Shift Dampener System (SDS) propellers greatly reduce the noise associated with shifting an engine in and out of gear by absorbing the forces generated when forward and reverse gears are engaged.

SINGLE RAM POWER TRIM AND TILT

The compact and light-weight single ram power, trim and tilt (PTT) unit and bracket have been developed exclusively for this engine.

VARIABLE TROLLING CONTROL

Yamaha’s variable trolling control allows the skipper to precisely adjust the engine’s idling speed from 600 to 1000 RPM in 50 RPM increments. The ability to finely tune the trolling speed allows fisherman to perfect their lure presentation when chasing different species of fish.

Technical Specification

Engine Make: Yamaha

Horse Power: 115

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $20,150

Available in:

  • F115LB – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Alloy Performance Prop, Fully Fitted with 6 Yrs/600Hrs Warranty – (Grey) $20,150
  • F115XB – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Alloy Performance Prop, Fully Fitted with 6 Yrs/600Hrs Warranty – (Grey) $20,350
  • F115XB2 (Pearlescent White) – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Alloy Performance Prop, Fully Fitted with 6 Yrs/600Hrs Warranty – (Grey) $21,000

General Features:

  • 1832cc Four-Cylinder Engine
  • Electronic Throttle Valve
  • 81MM Cylinder Bore
  • Direct Ignition
  • F115LB – 172kgs
  • F115XB – 178kgs

Specifications:

  • Engine Type – 4-Stroke, 16 Valve DOHC Direct Action In-line 4
  • Bore x Stroke (mm) – 81.0 x 88.9
  • Displacement (cc) – 1832.0
  • Recommended Maximum RPM – 5300-6300
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 12V – 35A with Rectifier Regulator
  • Gear Ratio – 2.15 : 1 (Counter Rotating Prop Available)
  • Starter System – Electric
  • Operation Method – Mechanical control (Optional Multifunction Tiller)
  • Trim and Tilt Method – Power Trim & Tilt
  • Digital Gauges – Optional
  • Command Link Gauges – Optional

CLOSE

Yamaha F130

ExploreClose

Light, compact and incredibly versatile the new F130 has set new benchmarks for weight and performance in the mid-range horsepower market and carries on Yamaha’s proud heritage of exceptional saltwater 130 horsepower engines. This outboard was designed with Australian boaters in mind and delivers awesome acceleration and mid-range responsiveness as well as incredible fuel efficiency. This proven 1.8 litre, 16 valve, Double Overhead Camshaft, four-stroke engine features large intake and exhaust valves for efficient transfer of fuel and exhaust. The single electronic throttle valve allows for precise throttle movements to deliver exceptional response.

Technical Specification

Engine Make: Yamaha

Horse Power: 130

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $21,350

Available in:

  • F130LA – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Alloy Performance Prop, Fully Fitted with 6 Yrs/600Hrs Warranty – $21,350
  • F130XA – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Alloy Performance Prop, Fully Fitted with 6 Yrs/600Hrs Warranty – $21,600
  • F130XA, LF130XA – 704 Twin binnacle Mount, single CL5 gauge (Fuel Management), Stainless Steel Props, Fully Fitted with 6 Yrs/600Hrs Warranty – $44,500

General Features:

  • 1832cc Four-Cylinder Engine
  • Electronic Throttle Valve
  • 81MM Cylinder Bore
  • Direct Ignition
  • F130LA – 172kgs
  • F130XA – 178kgs

Specifications:

  • Engine Type – 4-Stroke, 16 Valve DOHC Direct Action In-line 4
  • Bore x Stroke (mm) – 81.0 x 88.9
  • Displacement (cc) – 1832.0
  • Recommended Maximum RPM – 5300-6300
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 12V – 35A with Rectifier Regulator
  • Gear Ratio – 2.15 : 1
  • Starter System – Electric
  • Operation Method – Mechanical control
  • Trim and Tilt Method – Power Trim & Tilt
  • Digital Gauges – Optional
  • Command Link Gauges – Optional

CLOSE

Yamaha F150

ExploreClose

Yamaha’s popular and proven range of F150 Digital and Mechanical Control outboards now feature a newly designed look and integrated steering, taking these engines to the next level when it comes to power, reliability and control.

Boat owners can now choose from Integrated Hydraulic Steering or Integrated Electro-Hydraulic Steering, with both systems housed in a neat, sealed cylinder unit, which is built into the transom bracket of the engine, rather than being a third-party bolt-on component. This results in a simple and clean rigging set-up, and an uncluttered bilge and transom area, while exposing less components to the elements for improved long-term durability and reliability.

The Integrated Electro-Hydraulic Steering models are fully compatible with Yamaha’s exclusive Helm Master EX Autopilot and Joystick system, a must have system for serious fishermen and skippers who demand ultimate boat control.

This new range of four-cylinder integrated steering models are ideal for all applications, including new boat packages, existing boat repowers and multi engine set-ups.

Available in signature Yamaha grey and pearlescent white, the modernized F150 outboards bring a new level of delight to boating.

 

MODELS F150SA F150CB F150C
Control System Digital Electronic Control (DEC) Digital Electronic Control (DEC) Mechanical Control
(MEC)
Steering System Integrated Electro-Hydraulic Steering (IEHS) Integrated Hydraulic Steering (IHS) Integrated Hydraulic Steering (IHS)
Colour Yamaha Grey or Pearlescent White Yamaha Grey Yamaha Grey
Helm Master EX Autopilot/Joystick Compatible Yes NO NO
Counter Rotating Yes NO Yes

FEATURES

2800CC FOUR-CYLINDER ENGINE

The 16 valve, 2.8 litre, double overhead camshaft (DOHC) layout with its increased cylinder capacity and large valves, results in optimum valve actuation, resulting in improved valve timing, acceleration and overall running performance.

8-TOOTH DOG CLUTCH

A tough “dog clutch” replaces the previous 6-tooth version for smoother, trouble-free shifting and longer life.

Anti-Corrosion - 5 Stage Paint System

Yamaha engines are known for their durability and high re-sale value. Part of this lies in the anti-corrosion protection. A unique YDC-30 aluminium alloy protects the engine’s exterior parts, while a zinc coating, high-quality stainless steel components and 5-stage exterior paint coating, offers long-lasting protection – inside and out.

 

 

Digital Network Gauges Compatible

This engines is compatible with Yamaha’s Digital Network Gauges (Command Link), giving you the information needed to maximise engine performance and efficiency, including Tachometer, Hours Run, Trim Angle, Oil Pressure, Warning lamps, Variable Trolling Control, Speed and Fuel Management.

HIGH OUTPUT ALTERNATOR

The new alternator delivers 36 amps at wide open throttle, producing a full 28 amps at only 1,000 RPM which means there is sufficient output to keep charging the battery even at low RPM. Includes a dual battery charging system.

OFFSET CRANKSHAFT

The crankshaft design is offset 5mm from the centre of cylinder for more efficient transfer of power to the crankshaft.

VARIABLE TROLLING CONTROL

Yamaha’s variable trolling control allows the skipper to precisely adjust the engine’s idling speed from 650 to 900 RPM in 50 RPM increments. The ability to finely tune the trolling speed allows fisherman to perfect their lure presentation when chasing different species of fish.

Integrated Electro-Hydraulic Steering

Fully integrated into the outboard bracket, the ‘steer-by-wire’ system is exceptionally smooth, responsive and feature rich, with the ability to work with Yamaha’s exclusive Helm Master™ EX Autopilot and Joystick system. The streamlined and compact design provides more bilge, engine well, and transom space than conventional steering systems and because it is Yamaha engineered, delivers exceptional performance and reliability. This engine comes with an electro helm. Available on select models only.

DIRECT IGNITION

The direct ignition system with a plug cap and an ignition coil provides higher reliability and increased performance.

ELECTRONIC THROTTLE VALVE

The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.

Helm Master® EX Control System

Helm Master ® EX is an industry-first fully integrated digital boat control system that delivers next level control over your boat for increased boating and fishing enjoyment. Now available for single and multiple outboard engine applications.

HIGH OUTPUT ALTERNATOR

This alternator delivers more power: 50 amps at wide open throttle, producing a full 22 amps at only 600 rpm which means there is sufficient output to keep charging the battery even at low RPM.

Integrated Hydraulic Steering

Featuring the same streamlined look as the Electro-Hydraulic Steering model, these models combine conventional hydraulic helm and lines with a built-in hydraulic cylinder. Simple in design yet offering all the space-saving, premium benefits of integrated steering, this system offers a fresh look and smooth, precise non-powered control. As the hydraulic lines are connected directly to the fixed bracket and steering cylinder, there is none of the usual wear and tear that is seen on traditional hydraulic systems. Hydraulic helm and lines purchased separately.

OFFSET CRANKSHAFT

The crankshaft design is offset 10mm from the centre of cylinder for more efficient transfer of power to the crankshaft.

TotalTilt™ with Tilt Limiter

Available on Digital Electronic Control (DEC) models, Yamaha’s exclusive TotalTilt™ feature provides faster and easier engine tilting, by completely tilting the outboard up from any position with a simple double-push of the “UP” trim/tilt button, or fully tilting the outboard down (until trim ram contact) with a double-push of the “DOWN” trim/tilt button. This system also includes a built-in tilt limiter which automatically stops the engine tilt at a predetermined set point, to prevent engine contact with other objects.

Tilt Limiter

Available on Mechanical Control (MEC) outboard models, the built-in tilt limiter function automatically stops the engine tilt at a predetermined set point, preventing the outboard cowling from hitting objects such as bait boards or other parts of the boat.

Technical Specification

Engine Make: Yamaha

Horse Power: 150

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $26,800

Available in:

Mechanical Control, Intergrated Hydraulic steering

  • F150LC – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Stainless Steel Propellor, Fully Fitted with 6 Yrs/600Hrs Warranty – $26,800
  • F150XC – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Stainless Steel Propellor, Fully Fitted with 6 Yrs/600Hrs Warranty – $27,050
  • LF150XC, F150XC – 704 Dual Mount Binnacle, single CL5 gauge (Fuel Management), Stainless Steel Propellors, Fully Fitted with 6 Yrs/600Hrs Warranty (Excludes Tie Bar) – $54,300

Digital Electronic Control, Intergrated Hydraulic Steering

  • F150LCB (Forward order) – 6X9fm Single Side Mount control, Cl5 gauge (Fuel Management), Stainless Steel Propellor, Fully Fitted with 6 Yrs/600Hrs Warranty – $33,350
  • F150XCB – 6X9fm Single Side Mount control, CL5 gauge (Fuel Management), Stainless Steel Propellor, Fully Fitted with 6 Yrs/600Hrs Warranty – $33,600

Digital electronic Control, Intergrated Electro-Hydraulic Steering

  • F150XSA – 6X9fm Single Side Mount control, Cl5 gauge (Fuel Management), Stainless Steel Propellor, Fully Fitted with 6 Yrs/600Hrs Warranty – $36,950
  • F150XSA2 (Pearlescent White) 6x9fm Single Side Mount control, CL5 gauge (Fuel Management), Stainless Steel Propellor, Fully Fitted with 6 Yrs/600Hrs Warranty – $38,050
  • LF150XSA, F150XSA – 6X9 Dual Mount Binnacle, single CL5 gauge (Fuel Management), Stainless Steel Propellors, Straight Helm, Fully Fitted with 6 Yrs/600Hrs Warranty – $70,150
  • LF150XSA2, F150XSA2 (Pearlescent White)– 6X9 Dual Mount Binnacle, single CL5 gauge (Fuel Management), Stainless Steel Propellors, Straight Helm, Fully Fitted with 6 Yrs/600Hrs Warranty – $72,400

General Features:

  • 2600cc Four Cylinder Engine
  • 8-tooth Dog Clutch
  • Four Individual Throttle Valves
  • High Output Alternator

Specifications:

  • Engine Type – 16-Valve DOHC Direct-Action In-line 4
  • Bore x Stroke (mm) – F150SA & F150CB: 96.0 x 96.2 | F150C: 94.0 x 96.2
  • Displacement (cc) – F150SA & F150CB: 2785 | F150C: 2670
  • Recommended Maximum RPM – 5000-6000
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet Sump
  • Alternator Output – F150SA & F150CB: 50A | F150C: 35A
  • Gear Ratio – 2.00 : 1 (Counter Rotating Prop Option Available)
  • Starter System – Electric
  • Operation Method – F150SA: DEC/IEHS | F150CB: DEC/IHS | F150C: MEC/IHS
  • Trim and Tilt Method – F150SA & F150CB: TotalTilt™ with Limiter | F150C: Tilt Limiter
  • Digital Gauges – Optional
  • Command Link Gauges – Optional

CLOSE

Yamaha F175

ExploreClose

Yamaha’s popular and proven range of F175 Digital and Mechanical Control outboards now feature a newly designed look and integrated steering, taking these engines to the next level when it comes to power, reliability and control.

The Integrated Hydraulic Steering system is housed in a neat, sealed cylinder unit, which is built into the transom bracket of the engine, rather than being a third-party bolt-on component. This results in a simple and clean rigging set-up, and an uncluttered bilge and transom area, while exposing less components to the elements for improved long-term durability and reliability

This new range of four-cylinder integrated steering models are ideal for all applications, including new boat packages, existing boat repowers and multi engine set-ups. 

The modernized F175 outboards bring a new level of delight to boating.

FEATURES

2800CC FOUR-CYLINDER ENGINE

The 16 valve, 2.8 litre, double overhead camshaft (DOHC) layout with its increased cylinder capacity and large valves, results in optimum valve actuation, resulting in improved valve timing, acceleration and overall running performance.

DIRECT IGNITION

The direct ignition system with a plug cap and an ignition coil provides higher reliability and increased performance.

ELECTRONIC THROTTLE VALVE

The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.

HIGH OUTPUT ALTERNATOR

This alternator delivers more power: 50 amps at wide open throttle, producing a full 22 amps at only 600 rpm which means there is sufficient output to keep charging the battery even at low RPM.

Anti-Corrosion - 5 Stage Paint System

Yamaha engines are known for their durability and high re-sale value. Part of this lies in the anti-corrosion protection. A unique YDC-30 aluminium alloy protects the engine’s exterior parts, while a zinc coating, high-quality stainless steel components and 5-stage exterior paint coating, offers long-lasting protection – inside and out.

 

 

OFFSET CRANKSHAFT

The crankshaft design is offset 10mm from the centre of cylinder for more efficient transfer of power to the crankshaft.

ONE-TOUCH START-STOP FOR MULTIPLE ENGINES

This optional system for twin and triple installations automatically synchronises engines to allow a simple one-touch start and stop capability, for ease of use.

SHIFT DAMPENER SYSTEM

Yamaha’s Shift Dampener System (SDS) propellers greatly reduce the noise associated with shifting an engine in and out of gear by absorbing the forces generated when forward and reverse gears are engaged.

VARIABLE TROLLING CONTROL

Yamaha’s variable trolling control allows the skipper to precisely adjust the engine’s idling speed from 650 to 900 RPM in 50 RPM increments. The ability to finely tune the trolling speed allows fisherman to perfect their lure presentation when chasing different species of fish.

Technical Specification

Engine Make: Yamaha

Horse Power: 175

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $29,750

Available in, with integrated Hydraulic Steering:

  • F175LB – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Stainless Steel Propellor, Fully Fitted with 6 Yrs/600Hrs Warranty – $29,750
  • F175XB – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Stainless Steel Propellor, Fully Fitted with 6 Yrs/600Hrs Warranty – $30,000
  • F175XCB – 6x9fm control, CL5 gauge (Fuel Management), Stainless Steel Propeller, Fully Fitted with 6 yrs/600Hrs Warranty – $34,750

General Features:

  • 2600cc Four Cylinder Engine
  • 8-tooth Dog Clutch
  • Four Individual Throttle Valves
  • High Output Alternator

Specifications:

  • Engine Type – 4-Stroke, 16 Valve DOHC Direct Action In-Line 4
  • Bore x Stroke (mm) – 96 x 96
  • Displacement (cc) – 2785.0
  • Recommended Maximum RPM – 5000-6000
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 12V – 50A with rectifier regulator
  • Gear Ratio – 1.86 : 1
  • Starter System – Electric
  • Operation Method – F175CB: DEC/IHS | F175B: MEC/IHS
  • Trim and Tilt Method – F175CB: TotalTilt™ with Limiter | F175B: Tilt Limiter
  • Digital Gauges – Optional
  • Command Link Gauges – Optional

CLOSE

Yamaha F200

ExploreClose

Yamaha’s popular and proven range of F200 Digital and Mechanical Control outboards now feature a newly designed look and integrated steering, taking these engines to the next level when it comes to power, reliability and control.

Boat owners can now choose from Integrated Hydraulic Steering or Integrated Electro-Hydraulic Steering, with both systems housed in a neat, sealed cylinder unit, which is built into the transom bracket of the engine, rather than being a third-party bolt-on component. This results in a simple and clean rigging set-up, and an uncluttered bilge and transom area, while exposing less components to the elements for improved long-term durability and reliability.

The Integrated Electro-Hydraulic Steering models are fully compatible with Yamaha’s exclusive Helm Master EX Autopilot and Joystick system, a must have system for serious fishermen and skippers who demand ultimate boat control.

This new range of four-cylinder integrated steering models are ideal for all applications, including new boat packages, existing boat repowers and multi engine set-ups. 

Available in signature Yamaha grey and pearlescent white, the modernised F200 outboards bring a new level of delight to boating.

 

MODELS F200SA F200CB F200C
Control System Digital Electronic Control (DEC) Digital Electronic Control (DEC) Mechanical Control (MEC)
Steering System Integrated Electro-Hydraulic Steering (IEHS) Integrated Hydraulic Steering (IHS) Integrated Hydraulic Steering (IHS)
Colour Yamaha Grey or Pearl White Yamaha Grey Yamaha Grey
Helm Master EX Autopilot/Joystick Compatible Yes NO NO
Counter Rotating Yes NO Yes

FEATURES

2800CC FOUR-CYLINDER ENGINE

The 16 valve, 2.8 litre, double overhead camshaft (DOHC) layout with its increased cylinder capacity and large valves, results in optimum valve actuation, resulting in improved valve timing, acceleration and overall running performance.

Anti-Corrosion - 5 Stage Paint System

Yamaha engines are known for their durability and high re-sale value. Part of this lies in the anti-corrosion protection. A unique YDC-30 aluminium alloy protects the engine’s exterior parts, while a zinc coating, high-quality stainless steel components and 5-stage exterior paint coating, offers long-lasting protection – inside and out.

 

 

Digital Network Gauges Compatible

This engines is compatible with Yamaha’s Digital Network Gauges (Command Link), giving you the information needed to maximise engine performance and efficiency, including Tachometer, Hours Run, Trim Angle, Oil Pressure, Warning lamps, Variable Trolling Control, Speed and Fuel Management.

DIRECT IGNITION

The direct ignition system with a plug cap and an ignition coil provides higher reliability and increased performance.

ELECTRONIC THROTTLE VALVE

The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.

OFFSET CRANKSHAFT

The crankshaft design is offset 10mm from the centre of cylinder for more efficient transfer of power to the crankshaft.

ONE-TOUCH START-STOP FOR MULTIPLE ENGINES

This optional system for twin and triple installations automatically synchronises engines to allow a simple one-touch start and stop capability, for ease of use.

SHIFT DAMPENER SYSTEM

Yamaha’s Shift Dampener System (SDS) propellers greatly reduce the noise associated with shifting an engine in and out of gear by absorbing the forces generated when forward and reverse gears are engaged.

VARIABLE CAMSHAFT TIMING

The Variable Camshaft Timing (VCT) advances and retards the camshaft timing according to the engine RPMs. This in combination with the electronically controlled single throttle valve system and long intake manifold boosts low and mid-range torque for optimum acceleration.

VARIABLE TROLLING CONTROL

Yamaha’s variable trolling control allows the skipper to precisely adjust the engine’s idling speed from 650 to 900 RPM in 50 RPM increments. The ability to finely tune the trolling speed allows fisherman to perfect their lure presentation when chasing different species of fish.

Helm Master® EX Control System

Helm Master ® EX is an industry-first fully integrated digital boat control system that delivers next level control over your boat for increased boating and fishing enjoyment. Now available for single and multiple outboard engine applications.

HIGH OUTPUT ALTERNATOR

This alternator delivers more power: 50 amps at wide open throttle, producing a full 22 amps at only 600 rpm which means there is sufficient output to keep charging the battery even at low RPM.

Integrated Hydraulic Steering

Featuring the same streamlined look as the Electro-Hydraulic Steering model, these models combine conventional hydraulic helm and lines with a built-in hydraulic cylinder. Simple in design yet offering all the space-saving, premium benefits of integrated steering, this system offers a fresh look and smooth, precise non-powered control. As the hydraulic lines are connected directly to the fixed bracket and steering cylinder, there is none of the usual wear and tear that is seen on traditional hydraulic systems. Hydraulic helm and lines purchased separately.

Tilt Limiter

Available on Mechanical Control (MEC) outboard models, the built-in tilt limiter function automatically stops the engine tilt at a predetermined set point, preventing the outboard cowling from hitting objects such as bait boards or other parts of the boat.

Technical Specification

Engine Make: Yamaha

Horse Power: 200

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $31,950

Available in:

Mechanical Control, Intergrated Hydraulic Steering

  • F200LC – 703 Single Side Mount, 2 Round Gauges- 6Y8 (Fuel Management), Stainless Steel Propeller, Fully Fitted with 6 Yrs/600Hrs Warranty – $31,950
  • F200XC – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Stainless Steel Propeller, Fully Fitted with 6 Yrs/600Hrs Warranty – $32,250
  • LF200XC, F200XC – 704 Dual Mount Binnacle, single CL5 gauge (Fuel Management), Stainless Steel Propellors, Fully Fitted with 6 Yrs/600Hrs Warranty (Excludes Tie Bar) – $66,600

Digital Electronic Control, Intergrated Hydraulic Steering

  • F200LCB (Forward Order)– Single Binnacle DEC, CL5 gauge (Fuel Management), Stainless Steel Propeller, Fully Fitted with 6 yrs/600Hrs Warranty – $35,550
  • F200XCB – Single Binnacle DEC, CL5 gauge (Fuel Management), Stainless Steel Propeller, Fully Fitted with 6 yrs/600Hrs Warranty – $36,350

Digital Electronic Control, Intergrated Electro-Hydraulic Steering

  • F200XSA – Single Binnacle DEC, CL5 gauge (Fuel Management), Stainless Steel Propeller, Fully Fitted with 6 yrs/600Hrs Warranty – $39,850
  • F200XSA2 (Pearlescent white) – Single Binnacle DEC, CL5 gauge (Fuel Management), Stainless Steel Propeller, Fully Fitted with 6 yrs/600Hrs Warranty – $41,100
  • LF200XSA, F200XSA – 6X9 Dual Mount Binnacle, single CL5 gauge (Fuel Management), Stainless Steel Propellors, Fully Fitted, Straight helm with 6 Yrs/600Hrs Warranty – $76,000
  • LF200XSA2, F200XSA2 – 6X9 Dual Mount Binnacle, single CL5 gauge (Fuel Management), Stainless Steel Propellors, Straight helm, Fully Fitted with 6 Yrs/600Hrs Warranty – $78,500

General Features:

  • 2800cc Four-Cylinder Engine
  • Mechanical or Digital Throttle
  • Variable Camshaft Timing
  • Direct Ignition
  • Transom Height (mm [inch]) L: 516 [20.3] | X: 643 [25.3]

Specifications:

  • Engine Type – 4-Stroke, 16 Valve DOHC VCT Direct Action In-Line 4
  • Bore x Stroke (mm) – 96 x 96.2
  • Displacement (cc) – 2785.0
  • Recommended Maximum RPM – 5000-6000
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 12V – 50A with Rectifier Regulator
  • Gear Ratio – 1.86 : 1 (Counter Rotating Prop Available)
  • Starter System – Electric
  • Operation Method – F200SA: DEC/IEHS | F200CB: DEC/IHS | F200C: MEC/IHS
  • Trim and Tilt Method – F200SA & F200CB: TotalTilt™ with Limiter | F200C: Tilt Limiter
  • Digital Gauges – Standard
  • Command Link Gauges – Standard

CLOSE

Yamaha F225

ExploreClose

Next generation features, next generation styling, original reliability.

Yamaha’s all-new, V6 Offshore series takes the proven 4.2 litre engine platform to the next level by incorporating technological advancements previously only seen on Yamaha’s flagship V8 425hp XTO.

The new F225 not only looks good with it’s more aggressive styling, but comes with Yamaha’s Thrust Enhancing Reverse Exhaust system, which delivers increased prop grip and thrust for improved maneuvering in docking situations and reversing up to your next big catch.   

Another cool feature is the new Total TiltTM system which allows the outboard to fully tilt up and down from any position, with a simple double push of the Up or Down Tilt buttons. This not only makes operation easier, but the new mounting bracket system allows the engine to sit higher out of the water when not in use, for improved long-term durability and protection. 

When combined with Yamaha’s Helm Master EX control system, the new V6 Offshore 225 delivers a boating and fishing experience unlike any else on the water.

FEATURES

4,200CC V6 ENGINE

Featuring plasma-fused, sleeveless cylinders, double overhead camshafts (DOHC) and four valves per cylinder, these 4.2 Litre advanced V6 engines are extremely light, powerful and fuel efficient.

Compact In-Bank Exhaust System

Yamaha’s ongoing weight-saving program has delivered an innovative in-bank exhaust system, with the manifold integrated into the cylinder head. Along with other weight-saving technologies and materials, helps to create a supremely compact and light engine design.

DIGITAL ELECTRONIC THROTTLE

The digital ‘drive-by-wire’ throttle and shift offers the driver simple, smooth and precise operation.

ELECTRONIC THROTTLE VALVE

The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.

ONE-TOUCH START-STOP FOR MULTIPLE ENGINES

This optional system for twin and triple installations automatically synchronises engines to allow a simple one-touch start and stop capability, for ease of use.

PLASMA FUSION CYLINDERS

The plasma fusion process creates a cylinder wall surface that is 60% harder than steel, removing the need for conventional steel cylinder sleeves. This significantly reduces weight, improves fuel efficiency and increases the engine capacity, resulting in an improved power-to-weight performance.

VARIABLE CAMSHAFT TIMING

The Variable Camshaft Timing (VCT) advances and retards the camshaft timing according to the engine RPMs. This in combination with the electronically controlled single throttle valve system and long intake manifold boosts low and mid-range torque for optimum acceleration.

VARIABLE TROLLING CONTROL

Yamaha’s variable trolling control allows the skipper to precisely adjust the engine’s idling speed from 600 to 1000 RPM in 50 RPM increments. The ability to finely tune the trolling speed allows fisherman to perfect their lure presentation when chasing different species of fish.

Anti-Corrosion - 5 Stage Paint System

Yamaha engines are known for their durability and high re-sale value. Part of this lies in the anti-corrosion protection. A unique YDC-30 aluminium alloy protects the engine’s exterior parts, while a zinc coating, high-quality stainless steel components and 5-stage exterior paint coating, offers long-lasting protection – inside and out.

 

 

TotalTilt™ with Tilt Limiter

Available on Digital Electronic Control (DEC) models, Yamaha’s exclusive TotalTilt™ feature provides faster and easier engine tilting, by completely tilting the outboard up from any position with a simple double-push of the “UP” trim/tilt button, or fully tilting the outboard down (until trim ram contact) with a double-push of the “DOWN” trim/tilt button. This system also includes a built-in tilt limiter which automatically stops the engine tilt at a predetermined set point, to prevent engine contact with other objects.

Helm Master® EX Control System

Helm Master ® EX is an industry-first fully integrated digital boat control system that delivers next level control over your boat for increased boating and fishing enjoyment. Now available for single and multiple outboard engine applications.

Technical Specification

Engine Make: Yamaha

Horse Power: 225

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $37,100

Available in:

    • F225XCB – Single Binnacle DEC, CL5 Gauge (fuel management), Stainless Steel Propeller, Fully Fitted with 6 yrs/600 Hrs Warranty – $37,100

 

General Features:

      • 4,200cc V6 Engine
      • Digital Electronic Throttle
      • Plasma Fused Cylinders
      • Compact In-Bank Exhaust System
      • Transom Height (mm [inch]) X: 643 [25.3]
      • Dry Weight (kg) X: 253

Specifications:

  • Engine Type – 24 Valve DOHC with VCT Direct Action 60° – V6
  • Bore x Stroke (mm) – 96 x 96
  • Displacement (cc) – 4169.0
  • Recommended Maximum RPM – 5000-6000
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 12V-70A with Rectifier Regulator
  • Gear Ratio – 1.75 : 1 (Counter Rotating Prop Available)
  • Starter System – Electric
  • Operation Method – Digital Electronic Control (DEC)
  • Trim and Tilt Method – Power Trim & Tilt with TotalTilt™

CLOSE

Yamaha F250

ExploreClose

Next generation features, next generation styling, original reliability.

Yamaha’s all-new, V6 Offshore series takes the proven 4.2 litre engine platform to the next level by incorporating technological advancements previously only seen on Yamaha’s flagship V8 425hp XTO.

The new F250 not only looks good with it’s more aggressive styling, but comes with Yamaha’s Thrust Enhancing Reverse Exhaust system, which delivers increased prop grip and thrust for improved maneuvering in docking situations and reversing up to your next big catch.   

Another cool feature is the new TotalTilt™ system which allows the outboard to fully tilt up and down from any position, with a simple double push of the Up or Down Tilt buttons. This not only makes operation easier, but the new mounting bracket system allows the engine to sit higher out of the water when not in use, for improved long-term durability and protection. 

When combined with Yamaha’s Helm Master EX control system, the new V6 Offshore F250 delivers a boating and fishing experience unlike any else on the water.

FEATURES

4,200CC V6 ENGINE

Featuring plasma-fused, sleeveless cylinders, double overhead camshafts (DOHC) and four valves per cylinder, these 4.2 Litre advanced V6 engines are extremely light, powerful and fuel efficient.

DIGITAL ELECTRONIC THROTTLE

The digital ‘drive-by-wire’ throttle and shift offers the driver simple, smooth and precise operation.

Compact In-Bank Exhaust System

Yamaha’s ongoing weight-saving program has delivered an innovative in-bank exhaust system, with the manifold integrated into the cylinder head. Along with other weight-saving technologies and materials, helps to create a supremely compact and light engine design.

PLASMA FUSION CYLINDERS

The plasma fusion process creates a cylinder wall surface that is 60% harder than steel, removing the need for conventional steel cylinder sleeves. This significantly reduces weight, improves fuel efficiency and increases the engine capacity, resulting in an improved power-to-weight performance.

ELECTRONIC THROTTLE VALVE

The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.

ONE-TOUCH START-STOP FOR MULTIPLE ENGINES

This optional system for twin and triple installations automatically synchronises engines to allow a simple one-touch start and stop capability, for ease of use.

SHIFT DAMPENER SYSTEM

Yamaha’s Shift Dampener System (SDS) propellers greatly reduce the noise associated with shifting an engine in and out of gear by absorbing the forces generated when forward and reverse gears are engaged.

VARIABLE CAMSHAFT TIMING

The Variable Camshaft Timing (VCT) advances and retards the camshaft timing according to the engine RPMs. This in combination with the electronically controlled single throttle valve system and long intake manifold boosts low and mid-range torque for optimum acceleration.

VARIABLE TROLLING CONTROL

Yamaha’s variable trolling control allows the skipper to precisely adjust the engine’s idling speed from 600 to 1000 RPM in 50 RPM increments. The ability to finely tune the trolling speed allows fisherman to perfect their lure presentation when chasing different species of fish.

Helm Master® EX Control System

Helm Master ® EX is an industry-first fully integrated digital boat control system that delivers next level control over your boat for increased boating and fishing enjoyment. Now available for single and multiple outboard engine applications.

TotalTilt™ with Tilt Limiter

Available on Digital Electronic Control (DEC) models, Yamaha’s exclusive TotalTilt™ feature provides faster and easier engine tilting, by completely tilting the outboard up from any position with a simple double-push of the “UP” trim/tilt button, or fully tilting the outboard down (until trim ram contact) with a double-push of the “DOWN” trim/tilt button. This system also includes a built-in tilt limiter which automatically stops the engine tilt at a predetermined set point, to prevent engine contact with other objects.

Technical Specification

Engine Make: Yamaha

Horse Power: 250

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $39,550

Available in:

  • F250XCB – Single Binnacle DEC, CL5 Gauge, Stainless Steel Propeller, Fully Fitted with 6 yrs/600 Hrs Warranty – $39,550

General Features:

  • 4,200cc V6 Engine
  • Digital Electronic Throttle
  • Plasma Fused Cylinders
  • Compact In-Bank Exhaust System
  • Transom Height (mm [inch]) X: 643 [25.3]
  • Dry Weight (kg) X: 253 

Specifications:

  • Engine Type – 24 Valve DOHC with VCT Direct Action 60° – V6
  • Bore x Stroke (mm) – 96 x 96
  • Fuel Tank Capacity (l) –
  • Displacement (cc) – 4169.0
  • Recommended Maximum RPM – 5000-6000
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 12V-70A with Rectifier Regulator
  • Gear Ratio – 1.75 : 1 (Counter Rotating Prop Available)
  • Starter System – Electric
  • Operation Method – Digital Electronic Control (DEC)
  • Trim and Tilt Method – Power Trim & Tilt with TotalTilt™

CLOSE

Yamaha F250 DES

ExploreClose

Next generation control, next generation integration, next generation styling, original reliability.

Yamaha’s all-new, V6 Offshore series takes the proven 4.2 litre engine platform to the next level by incorporating technological advancements previously only seen on Yamaha’s flagship V8 425hp XTO models. The new V6 offshore models pack serious offshore grunt and refined engine features in equal measure.

The new F250 DES not only looks good with it’s more aggressive styling and choice of traditional Yamaha Grey or all new pearlescent white colours, but this engine has been designed to be completely integrated into the boats power, steering and control systems. To achieve this, Yamaha has included built in Digital Electric Steering (DES) in this model. This new DES system delivers extreme precision and smoothness and is a huge advancement in boat control. When combined with Yamaha’s Helm Master EX control system, these engine packages deliver boating and fishing experience unlike any else on the water.

For the first time event, Yamaha’s Thrust Enhancing Reverse Exhaust system is now available in this engine, delivering increased prop grip and thrust for improved maneuvering in docking situations and for reversing up to your next big catch. Another cool feature is the new Total TiltTM system which allows the outboard to fully tilt up and down from any position, with a simple double push of the Up or Down Tilt buttons. This not only makes operation easier, but the new mounting bracket system allows the engine to sit higher out of the water when not in use, for improved long-term durability and protection.

FEATURES

Fully Integrated Power System

The all-new V6 Offshore is fully compatible with Yamaha’s cutting-edge Helm Master EX boat control system, for a truly effortless boating experience. The full system combines Yamaha’s ‘drive-by-wire’ Digital Electronic Control (DEC), integrated Digital Electric Steering (DES), premium CL5 multifunction display, feature-packed autopilot and full manoeuvrability joystick.

Helm Master® EX Control System

Helm Master ® EX is an industry-first fully integrated digital boat control system that delivers next level control over your boat for increased boating and fishing enjoyment. Now available for single and multiple outboard engine applications.

New Look Cowling with Colour Options

The cowling has been completely redesigned for a more powerful, elegant and streamlined look. Integrated Electro-Hydraulic Steering models also offer the choice of signature Yamaha grey or pearlescent white finish, with premium looking raised chrome Yamaha graphics. Integrated Electro-Hydraulic model shown.

ONE-TOUCH START-STOP FOR MULTIPLE ENGINES

This optional system for twin and triple installations automatically synchronises engines to allow a simple one-touch start and stop capability, for ease of use.

PLASMA FUSION CYLINDERS

The plasma fusion process creates a cylinder wall surface that is 60% harder than steel, removing the need for conventional steel cylinder sleeves. This significantly reduces weight, improves fuel efficiency and increases the engine capacity, resulting in an improved power-to-weight performance.

TotalTilt™ with Tilt Limiter

Available on Digital Electronic Control (DEC) models, Yamaha’s exclusive TotalTilt™ feature provides faster and easier engine tilting, by completely tilting the outboard up from any position with a simple double-push of the “UP” trim/tilt button, or fully tilting the outboard down (until trim ram contact) with a double-push of the “DOWN” trim/tilt button. This system also includes a built-in tilt limiter which automatically stops the engine tilt at a predetermined set point, to prevent engine contact with other objects.

Thrust Enhancing Reverse Exhaust

Redirects exhaust bubbles away from the prop when operating in reverse and under 2500rpm, resulting in cleaner water for greater prop grip and significantly improved thrust. This is handy for navigating around marinas and docks, reversing onto your catch and when combined with the Helm Master EX joystick boating control system.

VARIABLE CAMSHAFT TIMING

The Variable Camshaft Timing (VCT) advances and retards the camshaft timing according to the engine RPMs. This in combination with the electronically controlled single throttle valve system and long intake manifold boosts low and mid-range torque for optimum acceleration.

4,200CC V6 ENGINE

Featuring plasma-fused, sleeveless cylinders, double overhead camshafts (DOHC) and four valves per cylinder, these 4.2 Litre advanced V6 engines are extremely light, powerful and fuel efficient.

Anti-Corrosion - 5 Stage Paint System

Yamaha engines are known for their durability and high re-sale value. Part of this lies in the anti-corrosion protection. A unique YDC-30 aluminium alloy protects the engine’s exterior parts, while a zinc coating, high-quality stainless steel components and 5-stage exterior paint coating, offers long-lasting protection – inside and out.

 

 

ELECTRONIC THROTTLE VALVE

The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.

Enhanced Lower Unit

Even after a decade of proven on-water performance in the harshest working conditions and marine environments, the new 4.2 litre V6 Offshore lower unit has received additional engineering improvements. New components and design features enhance the lower units legendary reliability and durability, further increasing operator confidence.

Technical Specification

Engine Make: Yamaha

Horse Power: 250

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $45,950

Available in:

  • F250XSB – Single Binnacle DEC, 1 Square Command link (CL) – 6YC Gauge, Stainless Steel Propeller, Fully Fitted with 6 yrs/600 Hrs Warranty – $45,950
  • F250XSB2 (Pearlescent White)– Single Binnacle DEC, 1 Square Command link (CL) – 6YC Gauge, Stainless Steel Propeller, Fully Fitted with 6 yrs/600 Hrs Warranty – $47,550

General Features:

  • 4,200cc V6 Engine
  • Digital Electronic Throttle
  • Plasma Fused Cylinders
  • Compact In-Bank Exhaust System
  • Transom Height (mm [inch]) X: 643 [25.3] | U: 770 [30.3]

Specifications:

  • Engine Type – 24 Valve DOHC with VCT Direct Action 60° – V6
  • Bore x Stroke (mm) – 96 x 96
  • Displacement (cc) – 4169.0
  • Recommended Maximum RPM – 5000-6000
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 12V-70A with Rectifier Regulator
  • Gear Ratio – 1.75 : 1 (Counter Rotating Prop Available)
  • Starter System – Electric
  • Operation Method – Digital Electronic Control (DEC) & Digital Electric Steering (DES)
  • Trim and Tilt Method – Power Trim & Tilt with TotalTilt™

CLOSE

Yamaha F300

ExploreClose

Next generation features, next generation styling, original reliability.

Yamaha’s all-new, V6 Offshore series takes the proven 4.2 litre engine platform to the next level by incorporating technological advancements previously only seen on Yamaha’s flagship V8 425hp XTO.

The new F300 not only looks good with it’s more aggressive styling, but comes with Yamaha’s Thrust Enhancing Reverse Exhaust system, which delivers increased prop grip and thrust for improved maneuvering in docking situations and reversing up to your next big catch.   

Another cool feature is the new TotalTilt™ system which allows the outboard to fully tilt up and down from any position, with a simple double push of the Up or Down Tilt buttons. This not only makes operation easier, but the new mounting bracket system allows the engine to sit higher out of the water when not in use, for improved long-term durability and protection. 

When combined with Yamaha’s Helm Master EX control system, the new V6 Offshore F300 delivers a boating and fishing experience unlike any else on the water. 

FEATURES

4,200CC V6 ENGINE

Featuring plasma-fused, sleeveless cylinders, double overhead camshafts (DOHC) and four valves per cylinder, these 4.2 Litre advanced V6 engines are extremely light, powerful and fuel efficient.

Compact In-Bank Exhaust System

Yamaha’s ongoing weight-saving program has delivered an innovative in-bank exhaust system, with the manifold integrated into the cylinder head. Along with other weight-saving technologies and materials, helps to create a supremely compact and light engine design.

DIGITAL ELECTRONIC THROTTLE

The digital ‘drive-by-wire’ throttle and shift offers the driver simple, smooth and precise operation.

ELECTRONIC THROTTLE VALVE

The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.

ONE-TOUCH START-STOP FOR MULTIPLE ENGINES

This optional system for twin and triple installations automatically synchronises engines to allow a simple one-touch start and stop capability, for ease of use.

PLASMA FUSION CYLINDERS

The plasma fusion process creates a cylinder wall surface that is 60% harder than steel, removing the need for conventional steel cylinder sleeves. This significantly reduces weight, improves fuel efficiency and increases the engine capacity, resulting in an improved power-to-weight performance.

SHIFT DAMPENER SYSTEM

Yamaha’s Shift Dampener System (SDS) propellers greatly reduce the noise associated with shifting an engine in and out of gear by absorbing the forces generated when forward and reverse gears are engaged.

VARIABLE CAMSHAFT TIMING

The Variable Camshaft Timing (VCT) advances and retards the camshaft timing according to the engine RPMs. This in combination with the electronically controlled single throttle valve system and long intake manifold boosts low and mid-range torque for optimum acceleration.

VARIABLE TROLLING CONTROL

Yamaha’s variable trolling control allows the skipper to precisely adjust the engine’s idling speed from 600 to 1000 RPM in 50 RPM increments. The ability to finely tune the trolling speed allows fisherman to perfect their lure presentation when chasing different species of fish.

Technical Specification

Engine Make: Yamaha

Horse Power: 300

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $42,300

Available in:

  • F300XCB – Single Binnacle DEC, CL5 Gauge, Stainless Steel Propeller, Fully Fitted with 6 yrs/600 Hrs Warranty – $42,300

General Features:

  • 4,200cc V6 Engine
  • Digital Electronic Throttle
  • Plasma Fused Cylinders
  • Compact In-Bank Exhaust System
  • Transom Height (mm [inch]) X: 643 [25.3]
  • Dry Weight (kg) X: 253 

Specifications:

  • Engine Type – 24 Valve DOHC with VCT Direct Action 60° – V6
  • Bore x Stroke (mm) – 96 x 96
  • Displacement (cc) – 4169.0
  • Recommended Maximum RPM – 5000-6000
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 12V-70A with Rectifier Regulator
  • Gear Ratio – 1.75 : 1 (Counter Rotating Prop Available)
  • Starter System – Electric
  • Operation Method – Digital Electronic Control (DEC)
  • Trim and Tilt Method – Power Trim & Tilt with TotalTilt™

CLOSE

Yamaha F300 DES

ExploreClose

Next generation control, next generation integration, next generation styling, original reliability.

Yamaha’s all-new, V6 Offshore series takes the proven 4.2 litre engine platform to the next level by incorporating technological advancements previously only seen on Yamaha’s flagship V8 425hp XTO models. The new V6 offshore models pack serious offshore grunt and refined engine features in equal measure.

The new F300 DES not only looks good with it’s more aggressive styling and choice of traditional Yamaha Grey or all new pearlescent white colours, but this engine has been designed to be completely integrated in to the boats power, steering and control systems. To achieve this, Yamaha has included built in Digital Electric Steering (DES) in this model. This new DES system delivers extreme precision and smoothness and is a huge advancement in boat control. When combined with Yamaha’s Helm Master EX control system, these engine packages deliver boating and fishing experience unlike any else on the water.

For the first time event, Yamaha’s Thrust Enhancing Reverse Exhaust system is now available in this engine, delivering increased prop grip and thrust for improved maneuvering in docking situations and for reversing up to your next big catch. Another cool feature is the new Total Tilt system which allows the outboard to fully tilt up and down from any position, with a simple double push of the Up or Down Tilt buttons. This not only makes operation easier, but the new mounting bracket system allows the engine to sit higher out of the water when not in use, for improved long-term durability and protection.

FEATURES

4,200CC V6 ENGINE

Featuring plasma-fused, sleeveless cylinders, double overhead camshafts (DOHC) and four valves per cylinder, these 4.2 Litre advanced V6 engines are extremely light, powerful and fuel efficient.

Anti-Corrosion - 5 Stage Paint System

Yamaha engines are known for their durability and high re-sale value. Part of this lies in the anti-corrosion protection. A unique YDC-30 aluminium alloy protects the engine’s exterior parts, while a zinc coating, high-quality stainless steel components and 5-stage exterior paint coating, offers long-lasting protection – inside and out.

 

 

DIGITAL ELECTRONIC THROTTLE

The digital ‘drive-by-wire’ throttle and shift offers the driver simple, smooth and precise operation.

ELECTRONIC THROTTLE VALVE

The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.

Enhanced Lower Unit

Even after a decade of proven on-water performance in the harshest working conditions and marine environments, the new 4.2 litre V6 Offshore lower unit has received additional engineering improvements. New components and design features enhance the lower units legendary reliability and durability, further increasing operator confidence.

Fully Integrated Power System

The all-new V6 Offshore is fully compatible with Yamaha’s cutting-edge Helm Master EX boat control system, for a truly effortless boating experience. The full system combines Yamaha’s ‘drive-by-wire’ Digital Electronic Control (DEC), integrated Digital Electric Steering (DES), premium CL5 multifunction display, feature-packed autopilot and full manoeuvrability joystick.

Helm Master® EX Control System

Helm Master ® EX is an industry-first fully integrated digital boat control system that delivers next level control over your boat for increased boating and fishing enjoyment. Now available for single and multiple outboard engine applications.

New Look Cowling with Colour Options

The cowling has been completely redesigned for a more powerful, elegant and streamlined look. Integrated Electro-Hydraulic Steering models also offer the choice of signature Yamaha grey or pearlescent white finish, with premium looking raised chrome Yamaha graphics. Integrated Electro-Hydraulic model shown.

ONE-TOUCH START-STOP FOR MULTIPLE ENGINES

This optional system for twin and triple installations automatically synchronises engines to allow a simple one-touch start and stop capability, for ease of use.

PLASMA FUSION CYLINDERS

The plasma fusion process creates a cylinder wall surface that is 60% harder than steel, removing the need for conventional steel cylinder sleeves. This significantly reduces weight, improves fuel efficiency and increases the engine capacity, resulting in an improved power-to-weight performance.

TotalTilt™ with Tilt Limiter

Available on Digital Electronic Control (DEC) models, Yamaha’s exclusive TotalTilt™ feature provides faster and easier engine tilting, by completely tilting the outboard up from any position with a simple double-push of the “UP” trim/tilt button, or fully tilting the outboard down (until trim ram contact) with a double-push of the “DOWN” trim/tilt button. This system also includes a built-in tilt limiter which automatically stops the engine tilt at a predetermined set point, to prevent engine contact with other objects.

VARIABLE CAMSHAFT TIMING

The Variable Camshaft Timing (VCT) advances and retards the camshaft timing according to the engine RPMs. This in combination with the electronically controlled single throttle valve system and long intake manifold boosts low and mid-range torque for optimum acceleration.

Technical Specification

Engine Make: Yamaha

Horse Power: 300

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $48,650

Available in:

  • F300XSB – Single Binnacle DEC, 1 Square Command link (CL) – 6YC Gauge, Stainless Steel Propeller, Fully Fitted with 6 yrs/600 Hrs Warranty – $48,650
  • F300XSB2 (Pearlescent White)– Single Binnacle DEC, 1 Square Command link (CL) – 6YC Gauge, Stainless Steel Propeller, Fully Fitted with 6 yrs/600 Hrs Warranty – $50,300

General Features:

  • 4,200cc V6 Engine
  • Digital Electronic Throttle
  • Plasma Fused Cylinders
  • Compact In-Bank Exhaust System
  • Transom Height (mm [inch]) X: 643 [25.3] | U: 770 [30.3]

Specifications:

  • Engine Type – 24 Valve DOHC with VCT Direct Action 60° – V6
  • Bore x Stroke (mm) – 96 x 96
  • Displacement (cc) – 4169.0
  • Recommended Maximum RPM – 5000-6000
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 12V-70A with Rectifier Regulator
  • Gear Ratio – 1.75 : 1 (Counter Rotating Prop Available)
  • Starter System – Electric
  • Operation Method – Digital Electronic Control (DEC) & Digital Electric Steering (DES)
  • Trim and Tilt Method – Power Trim & Tilt with TotalTilt™

CLOSE

Yamaha XF450

ExploreClose

Yamaha has taken the next step forward in premium outboard power, with the introduction of the XTO Offshore 450.

Featuring the same 5.6L big block displacement and long list of features as our original XTO 425, this awesome engine improves the outboard that took the world by storm.

The XTO Offshore 450 now comes with a Phase Angle Control Charging System, which features three-phase, simultaneous charging that produces more net amps at a low RPM – ideal for running high demand devices like gyro stabilisers, air conditioning, sounds systems and more.

For extra convenience, this engine is equipped with Yamaha’s exclusive TotalTiltTM with tilt limiter, resulting in faster and easier engine tilting with a simple double push of the tilt up or down button.

The cowling has also received an upgrade with raised chrome graphics and restyled panels, adding to the XTO’s premium look while embodying the extreme power of this massive outboard.

With the huge success of Yamaha’s industry leading Helm MasterTM EX Autopilot and Joystick system, the XTO 450 Offshore now offers the option of a built-in Propeller light. Installed directly into the engine apron, this cool looking safety feature indicates when one of the Helm MasterTM EX SetPoint modes is active, providing a warning to anyone approaching from the rear of the vessel.

Yamaha has also released two additional XTO prop options. A new XTO EC® prop has been designed to reduce ventilation which can occur when pushing big heavy boats, due to the extreme thrust produced by this engine. For lighter vessels, a new 27-inch pitch prop is also available, providing increased RPM at wide-open throttle for potentially more top-end speed.

With all these improvements, the XTO 450 Offshore offers more power, more technology and more convenience than any other engine in Yamaha’s big horsepower line-up.

FEATURES

5559CC V8 Engine

The massive 5.6 Litre, 32 valve, direct fuel-injection, four-stroke engine delivers enough power to push large and heavy offshore boats. The self-tensioning chain immersed in an oil bath ensures quiet, maintenance free and consistent valve timing.

Integrated Electric Steering

This industry first ‘steer-by-wire’ system uses an electric motor to directly move and secure the outboard, without any hydraulics or electric pump. This delivers very fast, precise, leak free and maintenance-free steering – that uses less power and is packaged in a clean rigging set-up.

In-Water Gear Lube Servicing

The draining and replacement of the lower unit gear lubricant can occur while the boat is docked on the water, making the servicing of larger boats easier, quicker and cheaper.

Fully Integrated Power System

The fully integrated power system creates a truly effortless boating experience. The system combines integrated electric steering, ‘drive-by-wire’ throttle controls, Yamaha’s premium CL7 multifunction display and Helm Master joystick docking and positioning controls.

High Output Alternator

This powerful three winding, three phase charging system generates up to 90 Amps of electrical power. Additionally, 55 Amps of power can be generated while idling. This high output alternator enables a stable supply of power for running a wide array of electrical devices.

Direct Fuel Injection

First four-stroke outboard to use direct fuel injection in the outboard industry. A three stage fuel pump system sprays fuel at high pressure directly into the combustion chamber, resulting in better fuel burn, more power and improved fuel efficiency.

Multi-Part Cowling System

By designing the cowling in separate, easily removable parts – getting to specific sections of the outboard for servicing is now quicker and easier. This new cowling design also makes it possible to service larger boats while they are docked on the water.

Redesigned Lower Unit

The hydrodynamically designed, oversized gear case enables higher maximum speeds and greater stability when turning. The high quality marine grade stainless steel components and hardened gears have been designed to handle extreme loads and highly corrosive marine environments.

Plasma Fusion Cylinders

The plasma fusion process creates a cylinder wall surface that is 60% harder than steel, removing the need for conventional steel cylinder sleeves. This significantly reduces weight, improves fuel efficiency and increases the engine capacity, resulting in an improved power-to-weight performance.

Thrust Enhancing Exhaust Routing

Blade slippage is decreased significantly when in reverse due to the exhaust gases being ducted through a ‘relief’ bypass located above the anti-cavitation plate. This improves braking capacity and reduces vibrations through the boat.

Technical Specification

Engine Make: Yamaha

Horse Power: 450

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: POA

General Features:

  • 5559CC V8 Engine
  • Integrated Electric Steering
  • Fully Integrated Power System
  • High Output Alternator
  • Transom Height (mm [inch])X: 640 [25.1] | U: 767 [30.1] | E: 894 [35.1]
  • Dry Weight (kg)X: 442 | U: 453 | E: 463

Specifications:

  • Engine Type – 4-Stroke, 32 Valve DOHC Direct V8
  • Bore x Stroke (mm) – 96 x 96
  • Displacement (cc) – 5559.0
  • Recommended Maximum RPM – 5000-6000
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 102 (Net 96) Amp High Output Alternator
  • Gear Ratio – 1.79 (25/14)
  • Starter System – Electric
  • Operation Method – Steer By Wire
  • Trim and Tilt Method – TotalTilt with Tilt Limiter

CLOSE

F350

ExploreClose

The new 350 joins the Yamaha Offshore Outboard family, to deliver big horsepower, state-of-the art features, industry-leading boat control integration, premium level performance and reliability – filling an important segment in Yamaha’s high-horsepower line-up.

Incorporating an upgraded 4.3L engine block and extra-strong gear case, this outboard delivers 350 horsepower in an industry-leading lightweight package, making it more suitable to a wider range of offshore boating applications, than ever before.

The new 350 comes with many of the innovative features developed in Yamaha’s XTO 425 and 450 horsepower models, including built-in digital electric steering for premium, feature-rich control,  TotalTilt™ integrated tilt limiter for easier operation, thrust enhancing reverse exhaust for improved responsiveness, plus full compatibility with Yamaha’s exclusive Helm Master EX boat control system, across single and multiple outboard applications.

Combining all these awesome features with the choice of traditional Signature Grey or Pearlescent White colour options, this outboard will prove to be extremely popular in the offshore fishing scene.

FEATURES

New Look Cowling with Colour Options

The cowling has been completely redesigned for a more powerful, elegant and streamlined look. Integrated Electro-Hydraulic Steering models also offer the choice of signature Yamaha grey or pearlescent white finish, with premium looking raised chrome Yamaha graphics. Integrated Electro-Hydraulic model shown.

Helm Master® EX Control System

Helm Master ® EX is an industry-first fully integrated digital boat control system that delivers next level control over your boat for increased boating and fishing enjoyment. Now available for single and multiple outboard engine applications.

TotalTilt™ with Tilt Limiter

Available on Digital Electronic Control (DEC) models, Yamaha’s exclusive TotalTilt™ feature provides faster and easier engine tilting, by completely tilting the outboard up from any position with a simple double-push of the “UP” trim/tilt button, or fully tilting the outboard down (until trim ram contact) with a double-push of the “DOWN” trim/tilt button. This system also includes a built-in tilt limiter which automatically stops the engine tilt at a predetermined set point, to prevent engine contact with other objects.

Enhanced Lower Unit

Even after a decade of proven on-water performance in the harshest working conditions and marine environments, the new 4.2 litre V6 Offshore lower unit has received additional engineering improvements. New components and design features enhance the lower units legendary reliability and durability, further increasing operator confidence.

Fully Integrated Power System

The all-new V6 Offshore is fully compatible with Yamaha’s cutting-edge Helm Master EX boat control system, for a truly effortless boating experience. The full system combines Yamaha’s ‘drive-by-wire’ Digital Electronic Control (DEC), integrated Digital Electric Steering (DES), premium CL5 multifunction display, feature-packed autopilot and full manoeuvrability joystick.

ELECTRONIC THROTTLE VALVE

The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.

PLASMA FUSION CYLINDERS

The plasma fusion process creates a cylinder wall surface that is 60% harder than steel, removing the need for conventional steel cylinder sleeves. This significantly reduces weight, improves fuel efficiency and increases the engine capacity, resulting in an improved power-to-weight performance.

Thrust Enhancing Reverse Exhaust

Redirects exhaust bubbles away from the prop when operating in reverse and under 2500rpm, resulting in cleaner water for greater prop grip and significantly improved thrust. This is handy for navigating around marinas and docks, reversing onto your catch and when combined with the Helm Master EX joystick boating control system.

Built-In Digital Electric Steering (DES)

Yamaha’s bolt-on Digital Electric Steering (DES) can be added to all Digital Electronic Control engines including F225, F250 and F300. Delivers a smoother, faster and more precise steering, with additional capabilities. Removes need for steering pumps, hoses, hydraulic lines and bleeding procedures, resulting in a cleaner and less cluttered bilge area.

Enhanced Heat Management System

A rotating cooling fan has been incorporated into the flywheel to combat the potential build-up of residual heat inside the cowling. This cooling system is very effective in drawing heat out of the flywheel area even at low engine speeds, for improved durability and reliability.

Increased Charging Power

The enhanced heat management system keeps everything nice and cool under the cowling. This not only improves engine durability and reliability but creates more available amps, when it is needed most, at idle – powering the increasing array of electrical devices used in todays modern boats.

4256CC V6 Engine

This proven big block V-type 6-cylinder has an expanded piston stroke and a displacement of 4.3L, delivering more torque throughout all RPM ranges. Featuring plasma-fused, sleeveless cylinders, double overhead camshafts (DOHC) and four valves per cylinder, this engine is lightweight, powerful and fuel efficient.

Technical Specification

Engine Make: F350

Horse Power: 350

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4 Stroke

PRICE: Apply For price

  • Engine Type24 Valve DOHC with VCT Direct Action 60° – V6
  • Bore x Stroke (mm)96 x 98
  • Fuel Tank Capacity (l)
  • Displacement (cc)4256
  • Recommended Maximum RPM5000-6000
  • Fuel ManagementEFI
  • IgnitionTCI
  • Lubrication SystemWet-sump
  • Alternator Output12V-74A with Rectifier Regulator
  • Gear Ratio1.75 : 1 (Counter Rotating Prop Available)
  • Starter SystemElectric
  • Operation MethodDigital Electronic Control (DEC) & Digital Electric Steering (DES)
  • Trim and Tilt MethodPower Trim & Tilt with TotalTilt™
  • Digital Gauges – Optional

CLOSE

Yamaha F115

ExploreClose

Yamaha has been leading the way in the 115 horsepower four-stroke category for over ten years, with exceptional models that have proven the true value and versatility that a four-stroke outboard can deliver Australian boaters. With its increased engine capacity and a weight reduction of 15kg, the latest generation Yamaha F115 offers the best power-to-weight performance in its class – while maintaining an extremely fuel efficient and smooth operation that Yamaha four-strokes are famous for. This engine utilises a 16 valve, dual overhead camshaft design, electronic fuel injection and big bore throttle body to deliver awesome acceleration and mid-range responsiveness.

The 115 horsepower is now available in both signature Yamaha grey and new pearlescent white colour options, in both long and extra long shaft length.

FEATURES

1832CC FOUR-CYLINDER ENGINE

The 16 valve, 1.8 Litre, dual overhead camshaft design delivers superior efficiency in the transfer of intake and exhaust gasses throughout the RPM range. This outboard incorporates larger intake and exhaust valves which enhance response, efficiency and mid-range torque.

Anti-Corrosion - 5 Stage Paint System

Yamaha engines are known for their durability and high re-sale value. Part of this lies in the anti-corrosion protection. A unique YDC-30 aluminium alloy protects the engine’s exterior parts, while a zinc coating, high-quality stainless steel components and 5-stage exterior paint coating, offers long-lasting protection – inside and out.

 

 

COUNTER ROTATING PROPELLER

This engine offers a counter rotating propeller option for improved steering control for twin engine setups, ensuring the vessel maintains a ‘neutral helm’ at any speed.

Larger 81mm Cylinder Bore

The previous-generation F90 used a 79mm cylinder bore, in the next-generation F90 the cylinder bore size has been increased from 79mm to 81mm which provides more efficient power delivery. A larger valve has been used for increased transfer efficiency for both intake and exhaust.

MULTI-POINT ELECTRONIC FUEL INJECTION

The Multi-Point Electronic Fuel Injection (EFI) system, injects the right amount of fuel into the combustion chamber at the optimum timing, for ‘first-time, every-time’ hot and cold starting, improved fuel efficiency, excellent throttle response.

OFFSET CRANKSHAFT

The crankshaft design is offset 5mm from the centre of cylinder for more efficient transfer of power to the crankshaft.

SHIFT DAMPENER SYSTEM

Yamaha’s Shift Dampener System (SDS) propellers greatly reduce the noise associated with shifting an engine in and out of gear by absorbing the forces generated when forward and reverse gears are engaged.

SINGLE RAM POWER TRIM AND TILT

The compact and light-weight single ram power, trim and tilt (PTT) unit and bracket have been developed exclusively for this engine.

VARIABLE TROLLING CONTROL

Yamaha’s variable trolling control allows the skipper to precisely adjust the engine’s idling speed from 600 to 1000 RPM in 50 RPM increments. The ability to finely tune the trolling speed allows fisherman to perfect their lure presentation when chasing different species of fish.

Technical Specification

Engine Make: Yamaha

Horse Power: 115

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $20,150

Available in:

  • F115LB – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Alloy Performance Prop, Fully Fitted with 6 Yrs/600Hrs Warranty – (Grey) $20,150
  • F115XB – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Alloy Performance Prop, Fully Fitted with 6 Yrs/600Hrs Warranty – (Grey) $20,350
  • F115XB2 (Pearlescent White) – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Alloy Performance Prop, Fully Fitted with 6 Yrs/600Hrs Warranty – (Grey) $21,000

General Features:

  • 1832cc Four-Cylinder Engine
  • Electronic Throttle Valve
  • 81MM Cylinder Bore
  • Direct Ignition
  • F115LB – 172kgs
  • F115XB – 178kgs

Specifications:

  • Engine Type – 4-Stroke, 16 Valve DOHC Direct Action In-line 4
  • Bore x Stroke (mm) – 81.0 x 88.9
  • Displacement (cc) – 1832.0
  • Recommended Maximum RPM – 5300-6300
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 12V – 35A with Rectifier Regulator
  • Gear Ratio – 2.15 : 1 (Counter Rotating Prop Available)
  • Starter System – Electric
  • Operation Method – Mechanical control (Optional Multifunction Tiller)
  • Trim and Tilt Method – Power Trim & Tilt
  • Digital Gauges – Optional
  • Command Link Gauges – Optional

CLOSE

Yamaha F130

ExploreClose

Light, compact and incredibly versatile the new F130 has set new benchmarks for weight and performance in the mid-range horsepower market and carries on Yamaha’s proud heritage of exceptional saltwater 130 horsepower engines. This outboard was designed with Australian boaters in mind and delivers awesome acceleration and mid-range responsiveness as well as incredible fuel efficiency. This proven 1.8 litre, 16 valve, Double Overhead Camshaft, four-stroke engine features large intake and exhaust valves for efficient transfer of fuel and exhaust. The single electronic throttle valve allows for precise throttle movements to deliver exceptional response.

Technical Specification

Engine Make: Yamaha

Horse Power: 130

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $21,350

Available in:

  • F130LA – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Alloy Performance Prop, Fully Fitted with 6 Yrs/600Hrs Warranty – $21,350
  • F130XA – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Alloy Performance Prop, Fully Fitted with 6 Yrs/600Hrs Warranty – $21,600
  • F130XA, LF130XA – 704 Twin binnacle Mount, single CL5 gauge (Fuel Management), Stainless Steel Props, Fully Fitted with 6 Yrs/600Hrs Warranty – $44,500

General Features:

  • 1832cc Four-Cylinder Engine
  • Electronic Throttle Valve
  • 81MM Cylinder Bore
  • Direct Ignition
  • F130LA – 172kgs
  • F130XA – 178kgs

Specifications:

  • Engine Type – 4-Stroke, 16 Valve DOHC Direct Action In-line 4
  • Bore x Stroke (mm) – 81.0 x 88.9
  • Displacement (cc) – 1832.0
  • Recommended Maximum RPM – 5300-6300
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 12V – 35A with Rectifier Regulator
  • Gear Ratio – 2.15 : 1
  • Starter System – Electric
  • Operation Method – Mechanical control
  • Trim and Tilt Method – Power Trim & Tilt
  • Digital Gauges – Optional
  • Command Link Gauges – Optional

CLOSE

Yamaha F150

ExploreClose

Yamaha’s popular and proven range of F150 Digital and Mechanical Control outboards now feature a newly designed look and integrated steering, taking these engines to the next level when it comes to power, reliability and control.

Boat owners can now choose from Integrated Hydraulic Steering or Integrated Electro-Hydraulic Steering, with both systems housed in a neat, sealed cylinder unit, which is built into the transom bracket of the engine, rather than being a third-party bolt-on component. This results in a simple and clean rigging set-up, and an uncluttered bilge and transom area, while exposing less components to the elements for improved long-term durability and reliability.

The Integrated Electro-Hydraulic Steering models are fully compatible with Yamaha’s exclusive Helm Master EX Autopilot and Joystick system, a must have system for serious fishermen and skippers who demand ultimate boat control.

This new range of four-cylinder integrated steering models are ideal for all applications, including new boat packages, existing boat repowers and multi engine set-ups.

Available in signature Yamaha grey and pearlescent white, the modernized F150 outboards bring a new level of delight to boating.

 

MODELS F150SA F150CB F150C
Control System Digital Electronic Control (DEC) Digital Electronic Control (DEC) Mechanical Control
(MEC)
Steering System Integrated Electro-Hydraulic Steering (IEHS) Integrated Hydraulic Steering (IHS) Integrated Hydraulic Steering (IHS)
Colour Yamaha Grey or Pearlescent White Yamaha Grey Yamaha Grey
Helm Master EX Autopilot/Joystick Compatible Yes NO NO
Counter Rotating Yes NO Yes

FEATURES

2800CC FOUR-CYLINDER ENGINE

The 16 valve, 2.8 litre, double overhead camshaft (DOHC) layout with its increased cylinder capacity and large valves, results in optimum valve actuation, resulting in improved valve timing, acceleration and overall running performance.

8-TOOTH DOG CLUTCH

A tough “dog clutch” replaces the previous 6-tooth version for smoother, trouble-free shifting and longer life.

Anti-Corrosion - 5 Stage Paint System

Yamaha engines are known for their durability and high re-sale value. Part of this lies in the anti-corrosion protection. A unique YDC-30 aluminium alloy protects the engine’s exterior parts, while a zinc coating, high-quality stainless steel components and 5-stage exterior paint coating, offers long-lasting protection – inside and out.

 

 

Digital Network Gauges Compatible

This engines is compatible with Yamaha’s Digital Network Gauges (Command Link), giving you the information needed to maximise engine performance and efficiency, including Tachometer, Hours Run, Trim Angle, Oil Pressure, Warning lamps, Variable Trolling Control, Speed and Fuel Management.

HIGH OUTPUT ALTERNATOR

The new alternator delivers 36 amps at wide open throttle, producing a full 28 amps at only 1,000 RPM which means there is sufficient output to keep charging the battery even at low RPM. Includes a dual battery charging system.

OFFSET CRANKSHAFT

The crankshaft design is offset 5mm from the centre of cylinder for more efficient transfer of power to the crankshaft.

VARIABLE TROLLING CONTROL

Yamaha’s variable trolling control allows the skipper to precisely adjust the engine’s idling speed from 650 to 900 RPM in 50 RPM increments. The ability to finely tune the trolling speed allows fisherman to perfect their lure presentation when chasing different species of fish.

Integrated Electro-Hydraulic Steering

Fully integrated into the outboard bracket, the ‘steer-by-wire’ system is exceptionally smooth, responsive and feature rich, with the ability to work with Yamaha’s exclusive Helm Master™ EX Autopilot and Joystick system. The streamlined and compact design provides more bilge, engine well, and transom space than conventional steering systems and because it is Yamaha engineered, delivers exceptional performance and reliability. This engine comes with an electro helm. Available on select models only.

DIRECT IGNITION

The direct ignition system with a plug cap and an ignition coil provides higher reliability and increased performance.

ELECTRONIC THROTTLE VALVE

The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.

Helm Master® EX Control System

Helm Master ® EX is an industry-first fully integrated digital boat control system that delivers next level control over your boat for increased boating and fishing enjoyment. Now available for single and multiple outboard engine applications.

HIGH OUTPUT ALTERNATOR

This alternator delivers more power: 50 amps at wide open throttle, producing a full 22 amps at only 600 rpm which means there is sufficient output to keep charging the battery even at low RPM.

Integrated Hydraulic Steering

Featuring the same streamlined look as the Electro-Hydraulic Steering model, these models combine conventional hydraulic helm and lines with a built-in hydraulic cylinder. Simple in design yet offering all the space-saving, premium benefits of integrated steering, this system offers a fresh look and smooth, precise non-powered control. As the hydraulic lines are connected directly to the fixed bracket and steering cylinder, there is none of the usual wear and tear that is seen on traditional hydraulic systems. Hydraulic helm and lines purchased separately.

OFFSET CRANKSHAFT

The crankshaft design is offset 10mm from the centre of cylinder for more efficient transfer of power to the crankshaft.

TotalTilt™ with Tilt Limiter

Available on Digital Electronic Control (DEC) models, Yamaha’s exclusive TotalTilt™ feature provides faster and easier engine tilting, by completely tilting the outboard up from any position with a simple double-push of the “UP” trim/tilt button, or fully tilting the outboard down (until trim ram contact) with a double-push of the “DOWN” trim/tilt button. This system also includes a built-in tilt limiter which automatically stops the engine tilt at a predetermined set point, to prevent engine contact with other objects.

Tilt Limiter

Available on Mechanical Control (MEC) outboard models, the built-in tilt limiter function automatically stops the engine tilt at a predetermined set point, preventing the outboard cowling from hitting objects such as bait boards or other parts of the boat.

Technical Specification

Engine Make: Yamaha

Horse Power: 150

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $26,800

Available in:

Mechanical Control, Intergrated Hydraulic steering

  • F150LC – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Stainless Steel Propellor, Fully Fitted with 6 Yrs/600Hrs Warranty – $26,800
  • F150XC – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Stainless Steel Propellor, Fully Fitted with 6 Yrs/600Hrs Warranty – $27,050
  • LF150XC, F150XC – 704 Dual Mount Binnacle, single CL5 gauge (Fuel Management), Stainless Steel Propellors, Fully Fitted with 6 Yrs/600Hrs Warranty (Excludes Tie Bar) – $54,300

Digital Electronic Control, Intergrated Hydraulic Steering

  • F150LCB (Forward order) – 6X9fm Single Side Mount control, Cl5 gauge (Fuel Management), Stainless Steel Propellor, Fully Fitted with 6 Yrs/600Hrs Warranty – $33,350
  • F150XCB – 6X9fm Single Side Mount control, CL5 gauge (Fuel Management), Stainless Steel Propellor, Fully Fitted with 6 Yrs/600Hrs Warranty – $33,600

Digital electronic Control, Intergrated Electro-Hydraulic Steering

  • F150XSA – 6X9fm Single Side Mount control, Cl5 gauge (Fuel Management), Stainless Steel Propellor, Fully Fitted with 6 Yrs/600Hrs Warranty – $36,950
  • F150XSA2 (Pearlescent White) 6x9fm Single Side Mount control, CL5 gauge (Fuel Management), Stainless Steel Propellor, Fully Fitted with 6 Yrs/600Hrs Warranty – $38,050
  • LF150XSA, F150XSA – 6X9 Dual Mount Binnacle, single CL5 gauge (Fuel Management), Stainless Steel Propellors, Straight Helm, Fully Fitted with 6 Yrs/600Hrs Warranty – $70,150
  • LF150XSA2, F150XSA2 (Pearlescent White)– 6X9 Dual Mount Binnacle, single CL5 gauge (Fuel Management), Stainless Steel Propellors, Straight Helm, Fully Fitted with 6 Yrs/600Hrs Warranty – $72,400

General Features:

  • 2600cc Four Cylinder Engine
  • 8-tooth Dog Clutch
  • Four Individual Throttle Valves
  • High Output Alternator

Specifications:

  • Engine Type – 16-Valve DOHC Direct-Action In-line 4
  • Bore x Stroke (mm) – F150SA & F150CB: 96.0 x 96.2 | F150C: 94.0 x 96.2
  • Displacement (cc) – F150SA & F150CB: 2785 | F150C: 2670
  • Recommended Maximum RPM – 5000-6000
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet Sump
  • Alternator Output – F150SA & F150CB: 50A | F150C: 35A
  • Gear Ratio – 2.00 : 1 (Counter Rotating Prop Option Available)
  • Starter System – Electric
  • Operation Method – F150SA: DEC/IEHS | F150CB: DEC/IHS | F150C: MEC/IHS
  • Trim and Tilt Method – F150SA & F150CB: TotalTilt™ with Limiter | F150C: Tilt Limiter
  • Digital Gauges – Optional
  • Command Link Gauges – Optional

CLOSE

Yamaha F175

ExploreClose

Yamaha’s popular and proven range of F175 Digital and Mechanical Control outboards now feature a newly designed look and integrated steering, taking these engines to the next level when it comes to power, reliability and control.

The Integrated Hydraulic Steering system is housed in a neat, sealed cylinder unit, which is built into the transom bracket of the engine, rather than being a third-party bolt-on component. This results in a simple and clean rigging set-up, and an uncluttered bilge and transom area, while exposing less components to the elements for improved long-term durability and reliability

This new range of four-cylinder integrated steering models are ideal for all applications, including new boat packages, existing boat repowers and multi engine set-ups. 

The modernized F175 outboards bring a new level of delight to boating.

FEATURES

2800CC FOUR-CYLINDER ENGINE

The 16 valve, 2.8 litre, double overhead camshaft (DOHC) layout with its increased cylinder capacity and large valves, results in optimum valve actuation, resulting in improved valve timing, acceleration and overall running performance.

DIRECT IGNITION

The direct ignition system with a plug cap and an ignition coil provides higher reliability and increased performance.

ELECTRONIC THROTTLE VALVE

The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.

HIGH OUTPUT ALTERNATOR

This alternator delivers more power: 50 amps at wide open throttle, producing a full 22 amps at only 600 rpm which means there is sufficient output to keep charging the battery even at low RPM.

Anti-Corrosion - 5 Stage Paint System

Yamaha engines are known for their durability and high re-sale value. Part of this lies in the anti-corrosion protection. A unique YDC-30 aluminium alloy protects the engine’s exterior parts, while a zinc coating, high-quality stainless steel components and 5-stage exterior paint coating, offers long-lasting protection – inside and out.

 

 

OFFSET CRANKSHAFT

The crankshaft design is offset 10mm from the centre of cylinder for more efficient transfer of power to the crankshaft.

ONE-TOUCH START-STOP FOR MULTIPLE ENGINES

This optional system for twin and triple installations automatically synchronises engines to allow a simple one-touch start and stop capability, for ease of use.

SHIFT DAMPENER SYSTEM

Yamaha’s Shift Dampener System (SDS) propellers greatly reduce the noise associated with shifting an engine in and out of gear by absorbing the forces generated when forward and reverse gears are engaged.

VARIABLE TROLLING CONTROL

Yamaha’s variable trolling control allows the skipper to precisely adjust the engine’s idling speed from 650 to 900 RPM in 50 RPM increments. The ability to finely tune the trolling speed allows fisherman to perfect their lure presentation when chasing different species of fish.

Technical Specification

Engine Make: Yamaha

Horse Power: 175

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $29,750

Available in, with integrated Hydraulic Steering:

  • F175LB – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Stainless Steel Propellor, Fully Fitted with 6 Yrs/600Hrs Warranty – $29,750
  • F175XB – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Stainless Steel Propellor, Fully Fitted with 6 Yrs/600Hrs Warranty – $30,000
  • F175XCB – 6x9fm control, CL5 gauge (Fuel Management), Stainless Steel Propeller, Fully Fitted with 6 yrs/600Hrs Warranty – $34,750

General Features:

  • 2600cc Four Cylinder Engine
  • 8-tooth Dog Clutch
  • Four Individual Throttle Valves
  • High Output Alternator

Specifications:

  • Engine Type – 4-Stroke, 16 Valve DOHC Direct Action In-Line 4
  • Bore x Stroke (mm) – 96 x 96
  • Displacement (cc) – 2785.0
  • Recommended Maximum RPM – 5000-6000
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 12V – 50A with rectifier regulator
  • Gear Ratio – 1.86 : 1
  • Starter System – Electric
  • Operation Method – F175CB: DEC/IHS | F175B: MEC/IHS
  • Trim and Tilt Method – F175CB: TotalTilt™ with Limiter | F175B: Tilt Limiter
  • Digital Gauges – Optional
  • Command Link Gauges – Optional

CLOSE

Yamaha F200

ExploreClose

Yamaha’s popular and proven range of F200 Digital and Mechanical Control outboards now feature a newly designed look and integrated steering, taking these engines to the next level when it comes to power, reliability and control.

Boat owners can now choose from Integrated Hydraulic Steering or Integrated Electro-Hydraulic Steering, with both systems housed in a neat, sealed cylinder unit, which is built into the transom bracket of the engine, rather than being a third-party bolt-on component. This results in a simple and clean rigging set-up, and an uncluttered bilge and transom area, while exposing less components to the elements for improved long-term durability and reliability.

The Integrated Electro-Hydraulic Steering models are fully compatible with Yamaha’s exclusive Helm Master EX Autopilot and Joystick system, a must have system for serious fishermen and skippers who demand ultimate boat control.

This new range of four-cylinder integrated steering models are ideal for all applications, including new boat packages, existing boat repowers and multi engine set-ups. 

Available in signature Yamaha grey and pearlescent white, the modernised F200 outboards bring a new level of delight to boating.

 

MODELS F200SA F200CB F200C
Control System Digital Electronic Control (DEC) Digital Electronic Control (DEC) Mechanical Control (MEC)
Steering System Integrated Electro-Hydraulic Steering (IEHS) Integrated Hydraulic Steering (IHS) Integrated Hydraulic Steering (IHS)
Colour Yamaha Grey or Pearl White Yamaha Grey Yamaha Grey
Helm Master EX Autopilot/Joystick Compatible Yes NO NO
Counter Rotating Yes NO Yes

FEATURES

2800CC FOUR-CYLINDER ENGINE

The 16 valve, 2.8 litre, double overhead camshaft (DOHC) layout with its increased cylinder capacity and large valves, results in optimum valve actuation, resulting in improved valve timing, acceleration and overall running performance.

Anti-Corrosion - 5 Stage Paint System

Yamaha engines are known for their durability and high re-sale value. Part of this lies in the anti-corrosion protection. A unique YDC-30 aluminium alloy protects the engine’s exterior parts, while a zinc coating, high-quality stainless steel components and 5-stage exterior paint coating, offers long-lasting protection – inside and out.

 

 

Digital Network Gauges Compatible

This engines is compatible with Yamaha’s Digital Network Gauges (Command Link), giving you the information needed to maximise engine performance and efficiency, including Tachometer, Hours Run, Trim Angle, Oil Pressure, Warning lamps, Variable Trolling Control, Speed and Fuel Management.

DIRECT IGNITION

The direct ignition system with a plug cap and an ignition coil provides higher reliability and increased performance.

ELECTRONIC THROTTLE VALVE

The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.

OFFSET CRANKSHAFT

The crankshaft design is offset 10mm from the centre of cylinder for more efficient transfer of power to the crankshaft.

ONE-TOUCH START-STOP FOR MULTIPLE ENGINES

This optional system for twin and triple installations automatically synchronises engines to allow a simple one-touch start and stop capability, for ease of use.

SHIFT DAMPENER SYSTEM

Yamaha’s Shift Dampener System (SDS) propellers greatly reduce the noise associated with shifting an engine in and out of gear by absorbing the forces generated when forward and reverse gears are engaged.

VARIABLE CAMSHAFT TIMING

The Variable Camshaft Timing (VCT) advances and retards the camshaft timing according to the engine RPMs. This in combination with the electronically controlled single throttle valve system and long intake manifold boosts low and mid-range torque for optimum acceleration.

VARIABLE TROLLING CONTROL

Yamaha’s variable trolling control allows the skipper to precisely adjust the engine’s idling speed from 650 to 900 RPM in 50 RPM increments. The ability to finely tune the trolling speed allows fisherman to perfect their lure presentation when chasing different species of fish.

Helm Master® EX Control System

Helm Master ® EX is an industry-first fully integrated digital boat control system that delivers next level control over your boat for increased boating and fishing enjoyment. Now available for single and multiple outboard engine applications.

HIGH OUTPUT ALTERNATOR

This alternator delivers more power: 50 amps at wide open throttle, producing a full 22 amps at only 600 rpm which means there is sufficient output to keep charging the battery even at low RPM.

Integrated Hydraulic Steering

Featuring the same streamlined look as the Electro-Hydraulic Steering model, these models combine conventional hydraulic helm and lines with a built-in hydraulic cylinder. Simple in design yet offering all the space-saving, premium benefits of integrated steering, this system offers a fresh look and smooth, precise non-powered control. As the hydraulic lines are connected directly to the fixed bracket and steering cylinder, there is none of the usual wear and tear that is seen on traditional hydraulic systems. Hydraulic helm and lines purchased separately.

Tilt Limiter

Available on Mechanical Control (MEC) outboard models, the built-in tilt limiter function automatically stops the engine tilt at a predetermined set point, preventing the outboard cowling from hitting objects such as bait boards or other parts of the boat.

Technical Specification

Engine Make: Yamaha

Horse Power: 200

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $31,950

Available in:

Mechanical Control, Intergrated Hydraulic Steering

  • F200LC – 703 Single Side Mount, 2 Round Gauges- 6Y8 (Fuel Management), Stainless Steel Propeller, Fully Fitted with 6 Yrs/600Hrs Warranty – $31,950
  • F200XC – 703 Single Side Mount, 2 Round gauges- 6Y8 (Fuel Management), Stainless Steel Propeller, Fully Fitted with 6 Yrs/600Hrs Warranty – $32,250
  • LF200XC, F200XC – 704 Dual Mount Binnacle, single CL5 gauge (Fuel Management), Stainless Steel Propellors, Fully Fitted with 6 Yrs/600Hrs Warranty (Excludes Tie Bar) – $66,600

Digital Electronic Control, Intergrated Hydraulic Steering

  • F200LCB (Forward Order)– Single Binnacle DEC, CL5 gauge (Fuel Management), Stainless Steel Propeller, Fully Fitted with 6 yrs/600Hrs Warranty – $35,550
  • F200XCB – Single Binnacle DEC, CL5 gauge (Fuel Management), Stainless Steel Propeller, Fully Fitted with 6 yrs/600Hrs Warranty – $36,350

Digital Electronic Control, Intergrated Electro-Hydraulic Steering

  • F200XSA – Single Binnacle DEC, CL5 gauge (Fuel Management), Stainless Steel Propeller, Fully Fitted with 6 yrs/600Hrs Warranty – $39,850
  • F200XSA2 (Pearlescent white) – Single Binnacle DEC, CL5 gauge (Fuel Management), Stainless Steel Propeller, Fully Fitted with 6 yrs/600Hrs Warranty – $41,100
  • LF200XSA, F200XSA – 6X9 Dual Mount Binnacle, single CL5 gauge (Fuel Management), Stainless Steel Propellors, Fully Fitted, Straight helm with 6 Yrs/600Hrs Warranty – $76,000
  • LF200XSA2, F200XSA2 – 6X9 Dual Mount Binnacle, single CL5 gauge (Fuel Management), Stainless Steel Propellors, Straight helm, Fully Fitted with 6 Yrs/600Hrs Warranty – $78,500

General Features:

  • 2800cc Four-Cylinder Engine
  • Mechanical or Digital Throttle
  • Variable Camshaft Timing
  • Direct Ignition
  • Transom Height (mm [inch]) L: 516 [20.3] | X: 643 [25.3]

Specifications:

  • Engine Type – 4-Stroke, 16 Valve DOHC VCT Direct Action In-Line 4
  • Bore x Stroke (mm) – 96 x 96.2
  • Displacement (cc) – 2785.0
  • Recommended Maximum RPM – 5000-6000
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 12V – 50A with Rectifier Regulator
  • Gear Ratio – 1.86 : 1 (Counter Rotating Prop Available)
  • Starter System – Electric
  • Operation Method – F200SA: DEC/IEHS | F200CB: DEC/IHS | F200C: MEC/IHS
  • Trim and Tilt Method – F200SA & F200CB: TotalTilt™ with Limiter | F200C: Tilt Limiter
  • Digital Gauges – Standard
  • Command Link Gauges – Standard

CLOSE

Yamaha F225

ExploreClose

Next generation features, next generation styling, original reliability.

Yamaha’s all-new, V6 Offshore series takes the proven 4.2 litre engine platform to the next level by incorporating technological advancements previously only seen on Yamaha’s flagship V8 425hp XTO.

The new F225 not only looks good with it’s more aggressive styling, but comes with Yamaha’s Thrust Enhancing Reverse Exhaust system, which delivers increased prop grip and thrust for improved maneuvering in docking situations and reversing up to your next big catch.   

Another cool feature is the new Total TiltTM system which allows the outboard to fully tilt up and down from any position, with a simple double push of the Up or Down Tilt buttons. This not only makes operation easier, but the new mounting bracket system allows the engine to sit higher out of the water when not in use, for improved long-term durability and protection. 

When combined with Yamaha’s Helm Master EX control system, the new V6 Offshore 225 delivers a boating and fishing experience unlike any else on the water.

FEATURES

4,200CC V6 ENGINE

Featuring plasma-fused, sleeveless cylinders, double overhead camshafts (DOHC) and four valves per cylinder, these 4.2 Litre advanced V6 engines are extremely light, powerful and fuel efficient.

Compact In-Bank Exhaust System

Yamaha’s ongoing weight-saving program has delivered an innovative in-bank exhaust system, with the manifold integrated into the cylinder head. Along with other weight-saving technologies and materials, helps to create a supremely compact and light engine design.

DIGITAL ELECTRONIC THROTTLE

The digital ‘drive-by-wire’ throttle and shift offers the driver simple, smooth and precise operation.

ELECTRONIC THROTTLE VALVE

The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.

ONE-TOUCH START-STOP FOR MULTIPLE ENGINES

This optional system for twin and triple installations automatically synchronises engines to allow a simple one-touch start and stop capability, for ease of use.

PLASMA FUSION CYLINDERS

The plasma fusion process creates a cylinder wall surface that is 60% harder than steel, removing the need for conventional steel cylinder sleeves. This significantly reduces weight, improves fuel efficiency and increases the engine capacity, resulting in an improved power-to-weight performance.

VARIABLE CAMSHAFT TIMING

The Variable Camshaft Timing (VCT) advances and retards the camshaft timing according to the engine RPMs. This in combination with the electronically controlled single throttle valve system and long intake manifold boosts low and mid-range torque for optimum acceleration.

VARIABLE TROLLING CONTROL

Yamaha’s variable trolling control allows the skipper to precisely adjust the engine’s idling speed from 600 to 1000 RPM in 50 RPM increments. The ability to finely tune the trolling speed allows fisherman to perfect their lure presentation when chasing different species of fish.

Anti-Corrosion - 5 Stage Paint System

Yamaha engines are known for their durability and high re-sale value. Part of this lies in the anti-corrosion protection. A unique YDC-30 aluminium alloy protects the engine’s exterior parts, while a zinc coating, high-quality stainless steel components and 5-stage exterior paint coating, offers long-lasting protection – inside and out.

 

 

TotalTilt™ with Tilt Limiter

Available on Digital Electronic Control (DEC) models, Yamaha’s exclusive TotalTilt™ feature provides faster and easier engine tilting, by completely tilting the outboard up from any position with a simple double-push of the “UP” trim/tilt button, or fully tilting the outboard down (until trim ram contact) with a double-push of the “DOWN” trim/tilt button. This system also includes a built-in tilt limiter which automatically stops the engine tilt at a predetermined set point, to prevent engine contact with other objects.

Helm Master® EX Control System

Helm Master ® EX is an industry-first fully integrated digital boat control system that delivers next level control over your boat for increased boating and fishing enjoyment. Now available for single and multiple outboard engine applications.

Technical Specification

Engine Make: Yamaha

Horse Power: 225

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $37,100

Available in:

    • F225XCB – Single Binnacle DEC, CL5 Gauge (fuel management), Stainless Steel Propeller, Fully Fitted with 6 yrs/600 Hrs Warranty – $37,100

 

General Features:

      • 4,200cc V6 Engine
      • Digital Electronic Throttle
      • Plasma Fused Cylinders
      • Compact In-Bank Exhaust System
      • Transom Height (mm [inch]) X: 643 [25.3]
      • Dry Weight (kg) X: 253

Specifications:

  • Engine Type – 24 Valve DOHC with VCT Direct Action 60° – V6
  • Bore x Stroke (mm) – 96 x 96
  • Displacement (cc) – 4169.0
  • Recommended Maximum RPM – 5000-6000
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 12V-70A with Rectifier Regulator
  • Gear Ratio – 1.75 : 1 (Counter Rotating Prop Available)
  • Starter System – Electric
  • Operation Method – Digital Electronic Control (DEC)
  • Trim and Tilt Method – Power Trim & Tilt with TotalTilt™

CLOSE

Yamaha F250

ExploreClose

Next generation features, next generation styling, original reliability.

Yamaha’s all-new, V6 Offshore series takes the proven 4.2 litre engine platform to the next level by incorporating technological advancements previously only seen on Yamaha’s flagship V8 425hp XTO.

The new F250 not only looks good with it’s more aggressive styling, but comes with Yamaha’s Thrust Enhancing Reverse Exhaust system, which delivers increased prop grip and thrust for improved maneuvering in docking situations and reversing up to your next big catch.   

Another cool feature is the new TotalTilt™ system which allows the outboard to fully tilt up and down from any position, with a simple double push of the Up or Down Tilt buttons. This not only makes operation easier, but the new mounting bracket system allows the engine to sit higher out of the water when not in use, for improved long-term durability and protection. 

When combined with Yamaha’s Helm Master EX control system, the new V6 Offshore F250 delivers a boating and fishing experience unlike any else on the water.

FEATURES

4,200CC V6 ENGINE

Featuring plasma-fused, sleeveless cylinders, double overhead camshafts (DOHC) and four valves per cylinder, these 4.2 Litre advanced V6 engines are extremely light, powerful and fuel efficient.

DIGITAL ELECTRONIC THROTTLE

The digital ‘drive-by-wire’ throttle and shift offers the driver simple, smooth and precise operation.

Compact In-Bank Exhaust System

Yamaha’s ongoing weight-saving program has delivered an innovative in-bank exhaust system, with the manifold integrated into the cylinder head. Along with other weight-saving technologies and materials, helps to create a supremely compact and light engine design.

PLASMA FUSION CYLINDERS

The plasma fusion process creates a cylinder wall surface that is 60% harder than steel, removing the need for conventional steel cylinder sleeves. This significantly reduces weight, improves fuel efficiency and increases the engine capacity, resulting in an improved power-to-weight performance.

ELECTRONIC THROTTLE VALVE

The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.

ONE-TOUCH START-STOP FOR MULTIPLE ENGINES

This optional system for twin and triple installations automatically synchronises engines to allow a simple one-touch start and stop capability, for ease of use.

SHIFT DAMPENER SYSTEM

Yamaha’s Shift Dampener System (SDS) propellers greatly reduce the noise associated with shifting an engine in and out of gear by absorbing the forces generated when forward and reverse gears are engaged.

VARIABLE CAMSHAFT TIMING

The Variable Camshaft Timing (VCT) advances and retards the camshaft timing according to the engine RPMs. This in combination with the electronically controlled single throttle valve system and long intake manifold boosts low and mid-range torque for optimum acceleration.

VARIABLE TROLLING CONTROL

Yamaha’s variable trolling control allows the skipper to precisely adjust the engine’s idling speed from 600 to 1000 RPM in 50 RPM increments. The ability to finely tune the trolling speed allows fisherman to perfect their lure presentation when chasing different species of fish.

Helm Master® EX Control System

Helm Master ® EX is an industry-first fully integrated digital boat control system that delivers next level control over your boat for increased boating and fishing enjoyment. Now available for single and multiple outboard engine applications.

TotalTilt™ with Tilt Limiter

Available on Digital Electronic Control (DEC) models, Yamaha’s exclusive TotalTilt™ feature provides faster and easier engine tilting, by completely tilting the outboard up from any position with a simple double-push of the “UP” trim/tilt button, or fully tilting the outboard down (until trim ram contact) with a double-push of the “DOWN” trim/tilt button. This system also includes a built-in tilt limiter which automatically stops the engine tilt at a predetermined set point, to prevent engine contact with other objects.

Technical Specification

Engine Make: Yamaha

Horse Power: 250

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $39,550

Available in:

  • F250XCB – Single Binnacle DEC, CL5 Gauge, Stainless Steel Propeller, Fully Fitted with 6 yrs/600 Hrs Warranty – $39,550

General Features:

  • 4,200cc V6 Engine
  • Digital Electronic Throttle
  • Plasma Fused Cylinders
  • Compact In-Bank Exhaust System
  • Transom Height (mm [inch]) X: 643 [25.3]
  • Dry Weight (kg) X: 253 

Specifications:

  • Engine Type – 24 Valve DOHC with VCT Direct Action 60° – V6
  • Bore x Stroke (mm) – 96 x 96
  • Fuel Tank Capacity (l) –
  • Displacement (cc) – 4169.0
  • Recommended Maximum RPM – 5000-6000
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 12V-70A with Rectifier Regulator
  • Gear Ratio – 1.75 : 1 (Counter Rotating Prop Available)
  • Starter System – Electric
  • Operation Method – Digital Electronic Control (DEC)
  • Trim and Tilt Method – Power Trim & Tilt with TotalTilt™

CLOSE

Yamaha F250 DES

ExploreClose

Next generation control, next generation integration, next generation styling, original reliability.

Yamaha’s all-new, V6 Offshore series takes the proven 4.2 litre engine platform to the next level by incorporating technological advancements previously only seen on Yamaha’s flagship V8 425hp XTO models. The new V6 offshore models pack serious offshore grunt and refined engine features in equal measure.

The new F250 DES not only looks good with it’s more aggressive styling and choice of traditional Yamaha Grey or all new pearlescent white colours, but this engine has been designed to be completely integrated into the boats power, steering and control systems. To achieve this, Yamaha has included built in Digital Electric Steering (DES) in this model. This new DES system delivers extreme precision and smoothness and is a huge advancement in boat control. When combined with Yamaha’s Helm Master EX control system, these engine packages deliver boating and fishing experience unlike any else on the water.

For the first time event, Yamaha’s Thrust Enhancing Reverse Exhaust system is now available in this engine, delivering increased prop grip and thrust for improved maneuvering in docking situations and for reversing up to your next big catch. Another cool feature is the new Total TiltTM system which allows the outboard to fully tilt up and down from any position, with a simple double push of the Up or Down Tilt buttons. This not only makes operation easier, but the new mounting bracket system allows the engine to sit higher out of the water when not in use, for improved long-term durability and protection.

FEATURES

Fully Integrated Power System

The all-new V6 Offshore is fully compatible with Yamaha’s cutting-edge Helm Master EX boat control system, for a truly effortless boating experience. The full system combines Yamaha’s ‘drive-by-wire’ Digital Electronic Control (DEC), integrated Digital Electric Steering (DES), premium CL5 multifunction display, feature-packed autopilot and full manoeuvrability joystick.

Helm Master® EX Control System

Helm Master ® EX is an industry-first fully integrated digital boat control system that delivers next level control over your boat for increased boating and fishing enjoyment. Now available for single and multiple outboard engine applications.

New Look Cowling with Colour Options

The cowling has been completely redesigned for a more powerful, elegant and streamlined look. Integrated Electro-Hydraulic Steering models also offer the choice of signature Yamaha grey or pearlescent white finish, with premium looking raised chrome Yamaha graphics. Integrated Electro-Hydraulic model shown.

ONE-TOUCH START-STOP FOR MULTIPLE ENGINES

This optional system for twin and triple installations automatically synchronises engines to allow a simple one-touch start and stop capability, for ease of use.

PLASMA FUSION CYLINDERS

The plasma fusion process creates a cylinder wall surface that is 60% harder than steel, removing the need for conventional steel cylinder sleeves. This significantly reduces weight, improves fuel efficiency and increases the engine capacity, resulting in an improved power-to-weight performance.

TotalTilt™ with Tilt Limiter

Available on Digital Electronic Control (DEC) models, Yamaha’s exclusive TotalTilt™ feature provides faster and easier engine tilting, by completely tilting the outboard up from any position with a simple double-push of the “UP” trim/tilt button, or fully tilting the outboard down (until trim ram contact) with a double-push of the “DOWN” trim/tilt button. This system also includes a built-in tilt limiter which automatically stops the engine tilt at a predetermined set point, to prevent engine contact with other objects.

Thrust Enhancing Reverse Exhaust

Redirects exhaust bubbles away from the prop when operating in reverse and under 2500rpm, resulting in cleaner water for greater prop grip and significantly improved thrust. This is handy for navigating around marinas and docks, reversing onto your catch and when combined with the Helm Master EX joystick boating control system.

VARIABLE CAMSHAFT TIMING

The Variable Camshaft Timing (VCT) advances and retards the camshaft timing according to the engine RPMs. This in combination with the electronically controlled single throttle valve system and long intake manifold boosts low and mid-range torque for optimum acceleration.

4,200CC V6 ENGINE

Featuring plasma-fused, sleeveless cylinders, double overhead camshafts (DOHC) and four valves per cylinder, these 4.2 Litre advanced V6 engines are extremely light, powerful and fuel efficient.

Anti-Corrosion - 5 Stage Paint System

Yamaha engines are known for their durability and high re-sale value. Part of this lies in the anti-corrosion protection. A unique YDC-30 aluminium alloy protects the engine’s exterior parts, while a zinc coating, high-quality stainless steel components and 5-stage exterior paint coating, offers long-lasting protection – inside and out.

 

 

ELECTRONIC THROTTLE VALVE

The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.

Enhanced Lower Unit

Even after a decade of proven on-water performance in the harshest working conditions and marine environments, the new 4.2 litre V6 Offshore lower unit has received additional engineering improvements. New components and design features enhance the lower units legendary reliability and durability, further increasing operator confidence.

Technical Specification

Engine Make: Yamaha

Horse Power: 250

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $45,950

Available in:

  • F250XSB – Single Binnacle DEC, 1 Square Command link (CL) – 6YC Gauge, Stainless Steel Propeller, Fully Fitted with 6 yrs/600 Hrs Warranty – $45,950
  • F250XSB2 (Pearlescent White)– Single Binnacle DEC, 1 Square Command link (CL) – 6YC Gauge, Stainless Steel Propeller, Fully Fitted with 6 yrs/600 Hrs Warranty – $47,550

General Features:

  • 4,200cc V6 Engine
  • Digital Electronic Throttle
  • Plasma Fused Cylinders
  • Compact In-Bank Exhaust System
  • Transom Height (mm [inch]) X: 643 [25.3] | U: 770 [30.3]

Specifications:

  • Engine Type – 24 Valve DOHC with VCT Direct Action 60° – V6
  • Bore x Stroke (mm) – 96 x 96
  • Displacement (cc) – 4169.0
  • Recommended Maximum RPM – 5000-6000
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 12V-70A with Rectifier Regulator
  • Gear Ratio – 1.75 : 1 (Counter Rotating Prop Available)
  • Starter System – Electric
  • Operation Method – Digital Electronic Control (DEC) & Digital Electric Steering (DES)
  • Trim and Tilt Method – Power Trim & Tilt with TotalTilt™

CLOSE

Yamaha F300

ExploreClose

Next generation features, next generation styling, original reliability.

Yamaha’s all-new, V6 Offshore series takes the proven 4.2 litre engine platform to the next level by incorporating technological advancements previously only seen on Yamaha’s flagship V8 425hp XTO.

The new F300 not only looks good with it’s more aggressive styling, but comes with Yamaha’s Thrust Enhancing Reverse Exhaust system, which delivers increased prop grip and thrust for improved maneuvering in docking situations and reversing up to your next big catch.   

Another cool feature is the new TotalTilt™ system which allows the outboard to fully tilt up and down from any position, with a simple double push of the Up or Down Tilt buttons. This not only makes operation easier, but the new mounting bracket system allows the engine to sit higher out of the water when not in use, for improved long-term durability and protection. 

When combined with Yamaha’s Helm Master EX control system, the new V6 Offshore F300 delivers a boating and fishing experience unlike any else on the water. 

FEATURES

4,200CC V6 ENGINE

Featuring plasma-fused, sleeveless cylinders, double overhead camshafts (DOHC) and four valves per cylinder, these 4.2 Litre advanced V6 engines are extremely light, powerful and fuel efficient.

Compact In-Bank Exhaust System

Yamaha’s ongoing weight-saving program has delivered an innovative in-bank exhaust system, with the manifold integrated into the cylinder head. Along with other weight-saving technologies and materials, helps to create a supremely compact and light engine design.

DIGITAL ELECTRONIC THROTTLE

The digital ‘drive-by-wire’ throttle and shift offers the driver simple, smooth and precise operation.

ELECTRONIC THROTTLE VALVE

The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.

ONE-TOUCH START-STOP FOR MULTIPLE ENGINES

This optional system for twin and triple installations automatically synchronises engines to allow a simple one-touch start and stop capability, for ease of use.

PLASMA FUSION CYLINDERS

The plasma fusion process creates a cylinder wall surface that is 60% harder than steel, removing the need for conventional steel cylinder sleeves. This significantly reduces weight, improves fuel efficiency and increases the engine capacity, resulting in an improved power-to-weight performance.

SHIFT DAMPENER SYSTEM

Yamaha’s Shift Dampener System (SDS) propellers greatly reduce the noise associated with shifting an engine in and out of gear by absorbing the forces generated when forward and reverse gears are engaged.

VARIABLE CAMSHAFT TIMING

The Variable Camshaft Timing (VCT) advances and retards the camshaft timing according to the engine RPMs. This in combination with the electronically controlled single throttle valve system and long intake manifold boosts low and mid-range torque for optimum acceleration.

VARIABLE TROLLING CONTROL

Yamaha’s variable trolling control allows the skipper to precisely adjust the engine’s idling speed from 600 to 1000 RPM in 50 RPM increments. The ability to finely tune the trolling speed allows fisherman to perfect their lure presentation when chasing different species of fish.

Technical Specification

Engine Make: Yamaha

Horse Power: 300

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $42,300

Available in:

  • F300XCB – Single Binnacle DEC, CL5 Gauge, Stainless Steel Propeller, Fully Fitted with 6 yrs/600 Hrs Warranty – $42,300

General Features:

  • 4,200cc V6 Engine
  • Digital Electronic Throttle
  • Plasma Fused Cylinders
  • Compact In-Bank Exhaust System
  • Transom Height (mm [inch]) X: 643 [25.3]
  • Dry Weight (kg) X: 253 

Specifications:

  • Engine Type – 24 Valve DOHC with VCT Direct Action 60° – V6
  • Bore x Stroke (mm) – 96 x 96
  • Displacement (cc) – 4169.0
  • Recommended Maximum RPM – 5000-6000
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 12V-70A with Rectifier Regulator
  • Gear Ratio – 1.75 : 1 (Counter Rotating Prop Available)
  • Starter System – Electric
  • Operation Method – Digital Electronic Control (DEC)
  • Trim and Tilt Method – Power Trim & Tilt with TotalTilt™

CLOSE

Yamaha F300 DES

ExploreClose

Next generation control, next generation integration, next generation styling, original reliability.

Yamaha’s all-new, V6 Offshore series takes the proven 4.2 litre engine platform to the next level by incorporating technological advancements previously only seen on Yamaha’s flagship V8 425hp XTO models. The new V6 offshore models pack serious offshore grunt and refined engine features in equal measure.

The new F300 DES not only looks good with it’s more aggressive styling and choice of traditional Yamaha Grey or all new pearlescent white colours, but this engine has been designed to be completely integrated in to the boats power, steering and control systems. To achieve this, Yamaha has included built in Digital Electric Steering (DES) in this model. This new DES system delivers extreme precision and smoothness and is a huge advancement in boat control. When combined with Yamaha’s Helm Master EX control system, these engine packages deliver boating and fishing experience unlike any else on the water.

For the first time event, Yamaha’s Thrust Enhancing Reverse Exhaust system is now available in this engine, delivering increased prop grip and thrust for improved maneuvering in docking situations and for reversing up to your next big catch. Another cool feature is the new Total Tilt system which allows the outboard to fully tilt up and down from any position, with a simple double push of the Up or Down Tilt buttons. This not only makes operation easier, but the new mounting bracket system allows the engine to sit higher out of the water when not in use, for improved long-term durability and protection.

FEATURES

4,200CC V6 ENGINE

Featuring plasma-fused, sleeveless cylinders, double overhead camshafts (DOHC) and four valves per cylinder, these 4.2 Litre advanced V6 engines are extremely light, powerful and fuel efficient.

Anti-Corrosion - 5 Stage Paint System

Yamaha engines are known for their durability and high re-sale value. Part of this lies in the anti-corrosion protection. A unique YDC-30 aluminium alloy protects the engine’s exterior parts, while a zinc coating, high-quality stainless steel components and 5-stage exterior paint coating, offers long-lasting protection – inside and out.

 

 

DIGITAL ELECTRONIC THROTTLE

The digital ‘drive-by-wire’ throttle and shift offers the driver simple, smooth and precise operation.

ELECTRONIC THROTTLE VALVE

The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.

Enhanced Lower Unit

Even after a decade of proven on-water performance in the harshest working conditions and marine environments, the new 4.2 litre V6 Offshore lower unit has received additional engineering improvements. New components and design features enhance the lower units legendary reliability and durability, further increasing operator confidence.

Fully Integrated Power System

The all-new V6 Offshore is fully compatible with Yamaha’s cutting-edge Helm Master EX boat control system, for a truly effortless boating experience. The full system combines Yamaha’s ‘drive-by-wire’ Digital Electronic Control (DEC), integrated Digital Electric Steering (DES), premium CL5 multifunction display, feature-packed autopilot and full manoeuvrability joystick.

Helm Master® EX Control System

Helm Master ® EX is an industry-first fully integrated digital boat control system that delivers next level control over your boat for increased boating and fishing enjoyment. Now available for single and multiple outboard engine applications.

New Look Cowling with Colour Options

The cowling has been completely redesigned for a more powerful, elegant and streamlined look. Integrated Electro-Hydraulic Steering models also offer the choice of signature Yamaha grey or pearlescent white finish, with premium looking raised chrome Yamaha graphics. Integrated Electro-Hydraulic model shown.

ONE-TOUCH START-STOP FOR MULTIPLE ENGINES

This optional system for twin and triple installations automatically synchronises engines to allow a simple one-touch start and stop capability, for ease of use.

PLASMA FUSION CYLINDERS

The plasma fusion process creates a cylinder wall surface that is 60% harder than steel, removing the need for conventional steel cylinder sleeves. This significantly reduces weight, improves fuel efficiency and increases the engine capacity, resulting in an improved power-to-weight performance.

TotalTilt™ with Tilt Limiter

Available on Digital Electronic Control (DEC) models, Yamaha’s exclusive TotalTilt™ feature provides faster and easier engine tilting, by completely tilting the outboard up from any position with a simple double-push of the “UP” trim/tilt button, or fully tilting the outboard down (until trim ram contact) with a double-push of the “DOWN” trim/tilt button. This system also includes a built-in tilt limiter which automatically stops the engine tilt at a predetermined set point, to prevent engine contact with other objects.

VARIABLE CAMSHAFT TIMING

The Variable Camshaft Timing (VCT) advances and retards the camshaft timing according to the engine RPMs. This in combination with the electronically controlled single throttle valve system and long intake manifold boosts low and mid-range torque for optimum acceleration.

Technical Specification

Engine Make: Yamaha

Horse Power: 300

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: From $48,650

Available in:

  • F300XSB – Single Binnacle DEC, 1 Square Command link (CL) – 6YC Gauge, Stainless Steel Propeller, Fully Fitted with 6 yrs/600 Hrs Warranty – $48,650
  • F300XSB2 (Pearlescent White)– Single Binnacle DEC, 1 Square Command link (CL) – 6YC Gauge, Stainless Steel Propeller, Fully Fitted with 6 yrs/600 Hrs Warranty – $50,300

General Features:

  • 4,200cc V6 Engine
  • Digital Electronic Throttle
  • Plasma Fused Cylinders
  • Compact In-Bank Exhaust System
  • Transom Height (mm [inch]) X: 643 [25.3] | U: 770 [30.3]

Specifications:

  • Engine Type – 24 Valve DOHC with VCT Direct Action 60° – V6
  • Bore x Stroke (mm) – 96 x 96
  • Displacement (cc) – 4169.0
  • Recommended Maximum RPM – 5000-6000
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 12V-70A with Rectifier Regulator
  • Gear Ratio – 1.75 : 1 (Counter Rotating Prop Available)
  • Starter System – Electric
  • Operation Method – Digital Electronic Control (DEC) & Digital Electric Steering (DES)
  • Trim and Tilt Method – Power Trim & Tilt with TotalTilt™

CLOSE

Yamaha XF450

ExploreClose

Yamaha has taken the next step forward in premium outboard power, with the introduction of the XTO Offshore 450.

Featuring the same 5.6L big block displacement and long list of features as our original XTO 425, this awesome engine improves the outboard that took the world by storm.

The XTO Offshore 450 now comes with a Phase Angle Control Charging System, which features three-phase, simultaneous charging that produces more net amps at a low RPM – ideal for running high demand devices like gyro stabilisers, air conditioning, sounds systems and more.

For extra convenience, this engine is equipped with Yamaha’s exclusive TotalTiltTM with tilt limiter, resulting in faster and easier engine tilting with a simple double push of the tilt up or down button.

The cowling has also received an upgrade with raised chrome graphics and restyled panels, adding to the XTO’s premium look while embodying the extreme power of this massive outboard.

With the huge success of Yamaha’s industry leading Helm MasterTM EX Autopilot and Joystick system, the XTO 450 Offshore now offers the option of a built-in Propeller light. Installed directly into the engine apron, this cool looking safety feature indicates when one of the Helm MasterTM EX SetPoint modes is active, providing a warning to anyone approaching from the rear of the vessel.

Yamaha has also released two additional XTO prop options. A new XTO EC® prop has been designed to reduce ventilation which can occur when pushing big heavy boats, due to the extreme thrust produced by this engine. For lighter vessels, a new 27-inch pitch prop is also available, providing increased RPM at wide-open throttle for potentially more top-end speed.

With all these improvements, the XTO 450 Offshore offers more power, more technology and more convenience than any other engine in Yamaha’s big horsepower line-up.

FEATURES

5559CC V8 Engine

The massive 5.6 Litre, 32 valve, direct fuel-injection, four-stroke engine delivers enough power to push large and heavy offshore boats. The self-tensioning chain immersed in an oil bath ensures quiet, maintenance free and consistent valve timing.

Integrated Electric Steering

This industry first ‘steer-by-wire’ system uses an electric motor to directly move and secure the outboard, without any hydraulics or electric pump. This delivers very fast, precise, leak free and maintenance-free steering – that uses less power and is packaged in a clean rigging set-up.

In-Water Gear Lube Servicing

The draining and replacement of the lower unit gear lubricant can occur while the boat is docked on the water, making the servicing of larger boats easier, quicker and cheaper.

Fully Integrated Power System

The fully integrated power system creates a truly effortless boating experience. The system combines integrated electric steering, ‘drive-by-wire’ throttle controls, Yamaha’s premium CL7 multifunction display and Helm Master joystick docking and positioning controls.

High Output Alternator

This powerful three winding, three phase charging system generates up to 90 Amps of electrical power. Additionally, 55 Amps of power can be generated while idling. This high output alternator enables a stable supply of power for running a wide array of electrical devices.

Direct Fuel Injection

First four-stroke outboard to use direct fuel injection in the outboard industry. A three stage fuel pump system sprays fuel at high pressure directly into the combustion chamber, resulting in better fuel burn, more power and improved fuel efficiency.

Multi-Part Cowling System

By designing the cowling in separate, easily removable parts – getting to specific sections of the outboard for servicing is now quicker and easier. This new cowling design also makes it possible to service larger boats while they are docked on the water.

Redesigned Lower Unit

The hydrodynamically designed, oversized gear case enables higher maximum speeds and greater stability when turning. The high quality marine grade stainless steel components and hardened gears have been designed to handle extreme loads and highly corrosive marine environments.

Plasma Fusion Cylinders

The plasma fusion process creates a cylinder wall surface that is 60% harder than steel, removing the need for conventional steel cylinder sleeves. This significantly reduces weight, improves fuel efficiency and increases the engine capacity, resulting in an improved power-to-weight performance.

Thrust Enhancing Exhaust Routing

Blade slippage is decreased significantly when in reverse due to the exhaust gases being ducted through a ‘relief’ bypass located above the anti-cavitation plate. This improves braking capacity and reduces vibrations through the boat.

Technical Specification

Engine Make: Yamaha

Horse Power: 450

Fuel Type: Unleaded

Drive Type: Outboard

Stroke: 4-Stroke

PRICE: POA

General Features:

  • 5559CC V8 Engine
  • Integrated Electric Steering
  • Fully Integrated Power System
  • High Output Alternator
  • Transom Height (mm [inch])X: 640 [25.1] | U: 767 [30.1] | E: 894 [35.1]
  • Dry Weight (kg)X: 442 | U: 453 | E: 463

Specifications:

  • Engine Type – 4-Stroke, 32 Valve DOHC Direct V8
  • Bore x Stroke (mm) – 96 x 96
  • Displacement (cc) – 5559.0
  • Recommended Maximum RPM – 5000-6000
  • Fuel Management – EFI
  • Ignition – TCI
  • Lubrication System – Wet-sump
  • Alternator Output – 102 (Net 96) Amp High Output Alternator
  • Gear Ratio – 1.79 (25/14)
  • Starter System – Electric
  • Operation Method – Steer By Wire
  • Trim and Tilt Method – TotalTilt with Tilt Limiter

CLOSE